Find the right job for your preferred location and specialty
Jobs Available
1 - 10 of 141 Matches
Pperform Primary Inspections on C Checks and HMV maintenance on Commercial aircraft for the following skills.
Redline Inspector will not be required to perform Buy Back inspections on work performed.
Essential Duties and Responsibilities
Duties responsibilities:
•Inspecting aircraft and components by obtaining and interpreting work cards, reviewing inspection requirements scope and detail, completing visual inspection of aircraft areas opened by AMTs including but not limited to fuel tanks, empennage, cargo areas, under floor area, fuselage skin, engines, pylons, wings, flight control surfaces, flight decks, and landing gear.
•Ensuring all assigned primary inspections are properly completed in compliance with established policies and procedures and corresponding inspection records and reports.
•Identifying non-routine work on aircraft systems operations, including but not limited to, engine performance, pneumatic / hydraulics, pressurization, air conditioning, electrical, fuel, and flight controls. Identifying location of discrepancies by using fuselage body stations and butt lines. Interpreting and ensuring compliance with all maintenance manuals including Airworthiness Directives, Service Bulletins, and Fleet Campaign Directives.
.
•Performing inspections only on products for which they have been properly trained and qualified.
•Ensure aircraft and surrounding areas are in a safe condition for the work being performed.
Redline Inspector will not be required to perform Buy Back inspections on work performed.
Requirements
A minimum of 2 years heavy commercial experience along with the 737 GEN FAM classes listed below is required for the listed skills.
A 40-Hour B737-NG Gen Fam (Must have Certificate of previous training)
Active A&P License
High School diploma or equivalent
Thorough understanding of FAA 14 CFR parts 21, , 43, 121, 125 and 145.
Subject to noises more than 85 dbs.
Must be able to bend, stoop, kneel, and stand for prolong periods of time, and climb steps, ladders and/or service stands.
Visual acuity must be a minimum of 20/40 corrected and must have full color vision.
Job requires participation in the DOT random drug and alcohol testing program.
Miscellaneous
About Our Client
Our client utilizes multiple locations across the United States to offer comprehensive single-source solutions for aircraft engineering, interiors, and maintenance. They support aircraft carriers around the world through a broad array of aircraft maintenance, Repair and Overhaul, as well as cabin interiors products.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
842691042687456
The A&P Mechanic maintains the Company’s aircraft in a safe and airworthy condition according to the Company maintenance manual and FAR regulations. Conducts or assists with all inspections and repairs on aircraft and aircraft sub-assemblies and performs required documentation, billing, regulatory and other administrative tasks in adherence with Company, customer and FAA policies.
Essential Duties and Responsibilities
Performs scheduled maintenance on aircraft, as assigned.
Ensures accuracy and timeliness of completed tasks.
Troubleshoots and repairs damaged, worn, or defective mechanical components.
Performs pre-flight and post-flight inspections on aircraft as time permits.
Reports discrepancies to Maintenance Manager or Pilot in Command.
Documents maintenance activities.
Completes required paperwork, including return to service requirements.
Observes current applicable FAA Regulations and GMM’s while performing required maintenance.
Complies with Company safety policies and procedures.
Maintains general cleanliness of hangar, parts/tool rooms and ramp areas, including operation of hangar floor cleaning machine.
Participates in preplanning briefing to ensure complete understanding of the project work scope, man-hour availability and projected completion date.
Ensures proper job planning so that parts and other resources are available in a timely manner to meet milestones and deadlines.
Demonstrates proper inspection and repair procedures.
Ensures that the work order is opened and updated throughout the project in a timely manner.
Ensures that squawks on work orders are accurate and descriptive.
Ensures that time and parts billed on a work order are accurate, justified and reasonable.
Trains, coaches and provides oversight to junior A&P’s.
Serves as a positive role model for ethical behavior and promotes an awareness and understanding of positive ethical and moral principles consistent with these principles; promotes and supports the mission, vision and values of the Company.
Performs other duties and assignments, as required.
Requirements
Minimum 5 years experience on corporate jets – Gulfstream, Learjet, Hawker, Challenger, Falcon experience is required
Experience performing scheduled inspections, line maintenance or sheet metal work on Gulfstream, Learjet, Hawker, Challenger, Falcon
A&P License Required
Local candidates preferred
Miscellaneous
Must bring tools
About Our Client
Our client is a full service corporate aircraft maintenance facility based in the DFW metroplex. Founded in 2008 by a team of highly experienced aviation professionals, they have grown into one of the most dependable aircraft maintenance operations in the industry.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
136472313167589
A&P Mechanics perform complex aircraft inspections, repairs, and modifications with minimal supervision. They must ensure that all work accomplished meets quality standards and specifications while interpreting aircraft technical manuals and electrical drawings. Mechanics must be able to follow standard operating procedures and operating support equipment such as external power carts, hydraulic mules, lift platforms, and tow tugs).
Essential Duties and Responsibilities
Perform scheduled, unscheduled or special inspections and maintenance in accordance with Manufacturer’s Maintenance Manuals and Federal Aviation regulations
Troubleshoot aircraft systems and perform operational and functional checks; service oil, tires, fuel and hydraulic systems; provide nitrogen and oxygen servicing; inspect and repair pitot static systems and provide battery servicing
Troubleshoot and perform maintenance/repairs/component removal/installation on aircraft, engines and a variety of electrical, mechanical and hydraulic components and accessories such as propellers, starters, generators, fuel pumps, hydraulic pumps, actuators, wheels, tires and brakes.
Perform structural repairs to airframes, including sheet metal work, riveting, patching and fiberglass/composite work
Certify all work as required by FAA regulations, industry guidelines and company standards/procedures, including interfaces as necessary with various computer tracking systems and using appropriate company forms
Make required entries for work orders, discrepancies, and corrective actions, and complete all associated computer/paperwork requirements, including turnover logs
Assist and train other technicians when needed
Participate in ongoing training opportunities, as appropriate for position
Perform other duties as assigned
Requirements
5+ years of aircraft maintenance experience
Current FAA Airframe and Powerplant license
High School Diploma or General Education Degree required.
Excellent interpersonal oral and written communication skills. Must be able to read, write and speak English.
Highly proficient with computer based technical data programs, and be competent in researching and use of appropriate technical manuals and industry reference materials
Must be mechanically adept and demonstrate the skills and knowledge consistent with industry standards for this position, including an understanding of various airframe and power plant systems.
Must be able to work inside and outside under varying work and climatic conditions, have the ability to lift up to 70 pounds and must be comfortable with heights.
Must have own tools
Experience desired on CRJ and ERJ aircraft, Sheet metal experience is a plus
Must have strong drive for top notch customer service and safety, and be a team player with a “Can Do” attitude.
This is a safety-sensitive position and falls under the provisions of the FAA's mandatory drug and alcohol testing requirements, including the release of prior drug and alcohol testing results from previous employers for the past two (2) years
Must pass a pre-employment drug screening and full background investigation which may include education, criminal and work history verifications. If hired, will be subject to mandatory random drug testing.
Miscellaneous
Must Bring Tools
About Our Client
Our client is a complete, one stop FAR part 145 repair station housed in a 32,000 square foot hangar facility located on Sioux City, Iowa's Sioux Gateway Airport (KSUX). They have all the necessary capabilities required to take care of any and all of their clients airline's needs. They provide a complete range of in-house maintenance and repair options from heavy checks, line maintenance, sheet metal repair and fabrication, all the way to complete exterior aircraft paint. They currently have numerous aircraft and engines on our certificate, including General Electric, Pratt an Whitney, and Rolls Royce. Aircraft include Saab, Beech, Embraer, De Haviland, and Bombardier CRJ 900 and Q 400 aircraft. In addition, we have staff mechanics, equipment, and personnel ready at a moments notice to dispatch 24/7 to any location necessary to get your AOG aircraft back in service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
135961581064723
A&P Mechanics perform complex aircraft inspections, repairs, and modifications with minimal supervision. They must ensure that all work accomplished meets quality standards and specifications while interpreting aircraft technical manuals and electrical drawings. Mechanics must be able to follow standard operating procedures and operating support equipment such as external power carts, hydraulic mules, lift platforms, and tow tugs).
Essential Duties and Responsibilities
Perform scheduled, unscheduled or special inspections and maintenance in accordance with Manufacturer’s Maintenance Manuals and Federal Aviation regulations
Troubleshoot aircraft systems and perform operational and functional checks; service oil, tires, fuel and hydraulic systems; provide nitrogen and oxygen servicing; inspect and repair pitot static systems and provide battery servicing
Troubleshoot and perform maintenance/repairs/component removal/installation on aircraft, engines and a variety of electrical, mechanical and hydraulic components and accessories such as propellers, starters, generators, fuel pumps, hydraulic pumps, actuators, wheels, tires and brakes.
Perform structural repairs to airframes, including sheet metal work, riveting, patching and fiberglass/composite work
Certify all work as required by FAA regulations, industry guidelines and company standards/procedures, including interfaces as necessary with various computer tracking systems and using appropriate company forms
Make required entries for work orders, discrepancies, and corrective actions, and complete all associated computer/paperwork requirements, including turnover logs
Assist and train other technicians when needed
Participate in ongoing training opportunities, as appropriate for position
Perform other duties as assigned
Requirements
2-5 years of aircraft maintenance experience
Current FAA Airframe and Powerplant license
High School Diploma or General Education Degree required.
Excellent interpersonal oral and written communication skills. Must be able to read, write and speak English.
Highly proficient with computer based technical data programs, and be competent in researching and use of appropriate technical manuals and industry reference materials
Must be mechanically adept and demonstrate the skills and knowledge consistent with industry standards for this position, including an understanding of various airframe and power plant systems.
Must be able to work inside and outside under varying work and climatic conditions, have the ability to lift up to 70 pounds and must be comfortable with heights.
Must have own tools
Experience desired on CRJ and ERJ aircraft, Sheet metal experience is a plus
Must have strong drive for top notch customer service and safety, and be a team player with a “Can Do” attitude.
This is a safety-sensitive position and falls under the provisions of the FAA's mandatory drug and alcohol testing requirements, including the release of prior drug and alcohol testing results from previous employers for the past two (2) years
Must pass a pre-employment drug screening and full background investigation which may include education, criminal and work history verifications. If hired, will be subject to mandatory random drug testing.
Miscellaneous
Must Bring Tools
About Our Client
Our client is a complete, one stop FAR part 145 repair station housed in a 32,000 square foot hangar facility located on Sioux City, Iowa's Sioux Gateway Airport (KSUX). They have all the necessary capabilities required to take care of any and all of their clients airline's needs. They provide a complete range of in-house maintenance and repair options from heavy checks, line maintenance, sheet metal repair and fabrication, all the way to complete exterior aircraft paint. They currently have numerous aircraft and engines on our certificate, including General Electric, Pratt an Whitney, and Rolls Royce. Aircraft include Saab, Beech, Embraer, De Haviland, and Bombardier CRJ 900 and Q 400 aircraft. In addition, we have staff mechanics, equipment, and personnel ready at a moments notice to dispatch 24/7 to any location necessary to get your AOG aircraft back in service.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
134464670260658
Join our team as a Structures Technician specializing in avionics modifications on 2nd shift. In this role, you’ll contribute to maintaining and upgrading customer aircraft, ensuring safety, quality, and efficiency in all work performed. You'll leverage your skills to troubleshoot, repair, and modify structural components while adhering to industry regulations and company standards.
Essential Duties and Responsibilities
Troubleshoot, repair, inspect, and perform maintenance on customer aircraft.
Fabricate or modify structural modifications on aircraft parts.
Conduct minor structural repairs on composite components (attached or detached).
Assist in hidden damage inspections and complex structural repairs on or off aircraft.
Perform aircraft component repairs and assist with removals/installations as required.
Document work performed in compliance with manuals and regulations.
Operate ground support equipment (GSE) and assist in towing aircraft as needed.
Participate in 5-S activities and maintain a clean, safe work environment.
Comply with all environmental health and safety policies and procedures.
Support maintenance activities at off-site locations, including unscheduled overtime and holiday work when required.
Collaborate with other disciplines for maintenance tasks as needed.
Requirements
Minimum of eight (8) years of experience in structural sheet metal repair/modification or substantiated similar experience.
Proficiency in interpreting mechanical engineering drawings.
Effective written and verbal communication skills to report on individual or aircraft status.
Ownership of a basic set of hand tools, with demonstrated inventory and control of tools.
Ability to obtain Ground Support Equipment (GSE) qualifications as required.
Eligible to obtain a Security Identification Display Area (SIDA) badge, if applicable.
Basic PC skills required; A&P Certification or Repairman Certificate preferred.
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. At the Hartford Service Center, the mission is to deliver top-tier maintenance and support for their fleet, ensuring each aircraft operates at peak performance. With a commitment to excellence and a focus on innovation, our client provides unmatched career opportunities for those passionate about aviation.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
829879828750785
The A&P Mechanic troubleshoots, repairs, inspects and performs maintenance on customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.
Essential Duties and Responsibilities
Adhere to General Work Requirements
Comply with Environmental / Health / Safety policies and procedures
Participate in 5-S activities
Perform all work in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Perform mechanical / electrical removals and installations
May assist with maintenance at off-site locations
Assist in providing time estimates
Assist in performing complex repairs on aircraft systems
Perform other duties as assigned
Requirements
Min of 4 years work exp as an Aircraft Technician OR Min 2 years work exp as an Aircraft Technician PLUS CRJ or Challenger airframe experience.
MRO experience is a plus
Military aircraft maintenance experience (Depot/Isochronal/Phase inspections) is a plus.
FAA Airframe and Powerplant (A&P) required.
Must possess their own tools.
Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing.
Must be comfortable with 12-hour shift work, which includes days / nights and weekends.
Miscellaneous
About Our Client
For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors.
Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
876060533212150
Perform quality aircraft maintenance and/or repairs within budgeted time in compliance with all applicable Code of Federal Regulations, Repair Station Procedures, customer requirements, and manufacturer's recommendations. Organize work plan in an efficient and resourceful manner.
Essential Duties and Responsibilities
Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation.
Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness .
Complete all tasks to the quality standards of Company, FAA and our customers' approved maintenance manual.
Perform work within estimated or budgeted hours
Read and use Maintenance Manuals, Illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, routine and non-routines and other related maintenance documents in order to troubleshoot and effectively complete work assignments.
Ensures that Company and customer aircraft maintenance documents are accurate and properly annotated.
Ensures documents are returned to the Technical Library and/or destroyed, as required, after jobs are complete.
Use and operate safely all ground support equipment, (i.e., Main Lifts, Scissor Lifts, etc.) and possess Company operating certification.
Promote a culture of safety my monitoring self and others to assure all duties are performed within the guidelines as specified by the Company Team Member Safety Manual.
Responsible for the proper execution of parts tags attached to repairable, serviceable or condemned parts.
Interface effectively with members of management, other departments and co-workers
Keep own and adjacent work area clean
Able to work any or all shifts
Requirements
2+ years of sheet metal experience on commercial aircraft
Able to read schematics/blueprints of moderate complexity, engineering drawings and technical instructions.
Have working knowledge of SRM (Repair Station Manual) references.
Must have own tools.
High School Diploma/GED.
Must be able to read, write and speak English.
Must be able to lift fifty (50) lbs. Subject to continual loud noises. Must be able to bend, stoop, kneel, and stand for prolonged periods of time, climb steps, ladders and/or service stands.
Successfully complete a comprehensive background check, verification of credentials, and a urinary pre-employment test for drugs as per DOT regulations.
Miscellaneous
About Our Client
Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
480951654135368
The Sheet Metal Mechanic is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.
Essential Duties and Responsibilities
Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner.
Proficient detail blueprint reading, ability to read, interpret and work from service bulletins, engineering work orders, major S.R.M. structural repairs.
Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall.
Knowledge of ATA codes, knowledge of all applicable F.A.R.’s and company policies and procedures including job card/ time card, routine/ non-routine cards, S.R.M.’s, service bulletins, E.O.’s, and work sign-off/ sell-off procedures.
Perform the duties of and provide the necessary training for lower skill levels.
Maintain and store tools in a serviceable condition.
Adhere to safe maintenance practices and keep a clean work area.
Maintain and supply personal records of work performed on OJT forms for the Training Department.
Successfully complete any courses deemed necessary by the Training Department.
Perform any work that may be assigned by his or her supervisor.
Requirements
8+ years of aviation structures mechanic experience
Tools are required
Miscellaneous
About Our Client
Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
175073016575661
The Sheet Metal Mechanic is responsible for assembling and/or repairing of aircraft parts, components, subsystems and operating systems.
Essential Duties and Responsibilities
Reads work instructions including production planning, engineering drawings, full size Mylar layouts, process specifications and other technical documentation to insure proper detail configuration.
Determines dimensions to layout holes patterns, install clips, brackets, nut plates and like items.
Lays out and marks dimensions and reference lines on material with or without templates or shop aides to develop or back drill hole patterns on composite, sheet metal and mechanical parts.
Trims sheet metal and composite parts to fit and files, grinds, deburrs, buffs, and smooths surfaces.
Installs assemblies in assembly jigs, fixtures or other tooling according to work instructions.
Assembles parts into subassemblies and final assemblies using basic hand tools such as, drill motors, die grinders, sanders, polishers, rivet shavers and other like tools.
Drills holes of varying sizes in detail parts and subassemblies according to work instructions.
Installs blind rivets, Jo-Bolts, hilocks, huck bolts, solid rivets and bolts, drives and bucks rivets to attach and assemble detail parts to structural parts and complete subassemblies to written and verbal work instructions.
Inspects completed assemblies for conformance to specifications.
Completes and maintains necessary paperwork for documenting processes performed.
Requirements
High School Diploma or GED
Two (2) or more years of major aircraft structural assembly.
Miscellaneous:
Must provide own tools
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
124617213742527
The Avionics Technician troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required.
Essential Duties and Responsibilities
Adhere to General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
Operate ground support equipment as required
Assist with mechanical / electrical removals and installations
May assist with maintenance at off-site locations
Perform other duties as assigned
Requirements
Min 4+ years of experience as an Avionics Technician
Corporate Jet or commercial aircraft experience preferred
If former military, Depot/Isochronal/Phase inspections are a plus
CRJ airframe experience is a plus
FAA A&P or A license is preferred
GROL or AET certification is preferred
Certification from Avionics, Electric A/C Technical school or equivalent military training is preferred
Must have own tools
Must be able to effectively communication in English both verbally and in writing
Must be comfortable with 12hr shift work including days/nights and weekends.
Miscellaneous
About Our Client
For over 130 years our clients innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors.
Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
123635740452038
