Find the right job for your preferred location and specialty
Jobs Available
1 - 10 of 290 Matches
Applies advanced technical skills and knowledge in conducting thermal imaging, radiographic, penetrant, ultrasonic, magnetic particle or other nondestructive tests of nonmetallic or metallic aircraft structural parts and components that are used in operational aircraft applications. Ensures the new or repaired product meets company, customer and FAA specifications and standards.
Essential Duties and Responsibilities
Essential Functions: 1. Performs non-destructive tests (NDT) and determines product acceptability to the authorized limits of the NDT level obtained in accordance with prescribed methods and procedures. 2. Records, organizes and evaluates test results and enter results into applicable documents. 3. Ensures compliance to all radiation safety rules and regulations and provides protection to self and others during testing. 4. Maintains equipment and assures calibration for tests to be performed. 5. Maintains inventory control of area equipment.
Additional Functions: 1. Works with and assists other NDT Technicians as required. 2. Coordinates NDT inspection workload according to priorities, efficiency and cost effectiveness. 3. Provides technical assistance to subordinate level NDT technicians. 4. Performs process control on area inspection equipment. 6. Performs exposure room interlock safety checks, establishes radiation safety barriers, zeros pocket dosimeters, operates radiation survey meters and completes applicable survey logs and forms. 7. Performs automated ultrasonic C-scan inspection of composite parts. 7_2. Must be available to work any shift. Perform other duties as assigned.
Requirements
Level of Supervision Required:
The level of supervision required described here is representative of those that must be met by an employee to successfully perform the essential functions of this job. Works under general supervision. Work is reviewed for completion to quality standards and schedule requirements. May adapt techniques and tools to meet special needs with approval from management.
Special Skills, Licenses or Job Requirements:
Demonstrate competency in applying the following in performing normal job duties.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
137210546372937
The Sheet Metal Mechanic is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.
Essential Duties and Responsibilities
Troubleshoots, repairs, replaces, and rebuilds structures components and appliances, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units.
Reads and interprets OEM and DoD Technical Manuals, service
bulletins, Airworthiness Directives, local directives and other specifications to determine maintenance method and procedures.
Performs structural (metallic and composite) inspections for damages
such as cracking, corrosion, delamination, or other damage as specified in the OEM inspection criteria.
Perform structural repairs (metallic and composite) as required utilizing
OEM SRM, Engineering Drawings with DER approval or other approved repair data.
Performs miscellaneous duties to service aircraft, including change and/or inspect fuel, and oil filters, cleaning screens, aircraft
lubrication, wheel and tire maintenance such as tire changes, clean and inspect wheels and bearings and servicing on-board sanitation facilities.
Mix paint and apply for touch-up of aircraft and components.
Complete required repair documentation in accordance with company requirements, Customer GMM if applicable, customer CAMP documents, or customer supplied Flight Docs documents
Requirements
5+ years' sheetmetal experience
Must have experience on 737 and/or Dash 8 aircraft
Must have minimum required tools.
Tool box must be etched shadowed prior to start
High school diploma or equivalent
Miscellaneous
Tools shall be identified with a number unique to the owner. Multiple items too small to identify (apexs, drill bits, etc.) will be placed in a container. The quantity of items, to include the container itself, shall be readable on the outside of the container.
Each item shall be listed on a “Master Tool Box” inventory. A copy shall be on file in QA and one copy in the owner’s tool box.
Facial Hair (Men) – Beards and mustaches, if worn, will be neatly trimmed to an approximate ¼” maximum. Short, evenly trimmed sideburns are allowed.
Hair Overall (All) - Will not be worn in an extreme or fad style. Men’s hair will not extend below the bottom of the standard shirt collar.
Tattoos (All) – Visible tattoos are allowed on arms and legs if they are not discriminatory based on racial, sexual, religious, ethnic, or other characteristics or attributes of a sensitive nature. These include the prohibition of any tattoos commonly associated with gangs, extremists and/or supremacist organizations or discrimination. Tattoos, brandings or body marks on the head, neck, face, tongue, lips, and/or scalp are prohibited. Hand tattoos are limited to one single-band ring tattoo, on one finger, on one hand.
Shoes – When working in safety and/or industrial flight line environment, shoes must follow OSHA guidelines. Can wear tennis shoes (Black is preferred)
Site Specific Uniforms – (All) – Standardized dress at our hangar locations include site specific color uniform pants (responsibility of the employee to provide), blue or white shirts. NO shorts or blue jeans. Can wear Dickies or Cargo pants (BLACK OR NAVY BLUE)
About Our Client
For over 20 years, our client has been providing outstanding aviation services on a global basis to operators of large corporate and V VIP aircraft.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
587384665934260
The Quality Inspector is responsible for inspecting aerospace components and manufactured parts throughout the production process to ensure compliance with customer specifications, engineering drawings, and company quality standards.
Essential Duties and Responsibilities
The Quality Inspector is responsible for inspecting aerospace components and manufactured parts throughout the production process to ensure compliance with customer specifications, engineering drawings, and company quality standards.
This position involves performing visual and dimensional inspections, verifying product specifications, identifying defects, and documenting inspection results. The Quality Inspector works closely with production personnel to identify quality issues, prevent defects, and ensure products meet established requirements before moving to the next stage of production or final delivery.
Inspect aircraft components and manufactured parts at various stages of production.
Perform visual and dimensional inspections using measuring tools such as calipers and micrometers.
Verify parts against work orders, blueprints, customer specifications, and engineering drawings.
Identify defects, discrepancies, and nonconforming materials.
Document inspection findings and maintain accurate quality records.
Determine whether products meet quality standards and are acceptable for production or delivery.
Assist production teams in identifying quality issues and preventing recurring defects.
Perform sampling inspections and final inspections as required.
Maintain a clean, organized, and safe inspection area.
Follow company quality procedures and customer requirements.
Requirements
Requirement Description
Education High school diploma or GED preferred. Applicants without one may be required to complete a pre-employment assessment.
Experience Previous quality inspection experience is preferred; aerospace experience is a plus.
Reading skills Ability to read and interpret blueprints, drawings, customer instructions, and work orders.
Math skills Basic math skills and the ability to perform measurements.
Technical skills Ability to learn and use measuring instruments and quality documentation systems.
Computer skills Basic computer skills, including Microsoft Office and electronic documentation.
Communication Ability to communicate effectively with production and quality personnel.
Work ethic Dependability, attention to detail, professionalism, and the ability to follow instructions.
Miscellaneous
About Our Client
This client is located in Tulsa, OK and is driven by a passion for innovation and a commitment to excellence. They have 13 locations across North America. Since the beginning in 1948, They have a proven track record of delivering high-quality products and services that are reliable, safe, and efficient. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
504751283427731
Applies basic and some advanced technical skills and knowledge to perform all of the primary work operations required to chemically clean to remove grease, scale, dirt, and other foreign matter from material or parts for operational aircraft applications. Essential Functions and Key Responsibilities
Essential Duties and Responsibilities
Performs tasks that are simple to moderately complex requiring some skill, experience and judgment to complete relative to cleaning parts manually or by operating automated clean line equipment. Works under close to general supervision and determines plans and actions from standard procedural alternatives. Reviews work instructions, operations manuals and other documentation to define the requirement for the processing of the parts are material to be cleaned. Loads objects on conveyor that carries them through series of chemical and rinsing baths, or places objects on racks or in containers and immerses objects in chemical and rinsing solutions. Starts the process equipment and monitor the process line equipment to ensure proper overall operation.
Requirements
High school or equivalent and two (2) to four (4) years of experience in a manufacturing environment, or equivalent combination of education, training and experience. Completion or the approved Company training course for clean line operations will meet the experience requirements for this job.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
110024434611055
Applies basic, and some intermediate technical skills and knowledge to set up and operate the process equipment used to stretch, saw, grind and polish and otherwise complete the processing of acrylic billets into finished acrylic sheets of material for use in making transparencies for operational aircraft applications.Essential
Essential Duties and Responsibilities
Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned.Performs tasks and operate machines and equipment that are required to process acrylic material used to make transparencies into parts and assemblies such as wing tip lenses, flight deck, passenger cabin and helicopter windows used on operational aircraft.Reads blueprint, work instructions and planning documents to understand the specifications that are needed to produce quality material. Determine how such items as oven temperature, heating time, dimensions, tolerances, material cutting, polish machine speeds, holding fixtures, and other operations affect the outcome of the production process.Prepares acrylic billet material for the pre-stretch heating cycle. Places prepared billets into the oven using various types of material handling equipment and set the temperature controls. Lifts and positions heated material into the holding fixture, sets the machine controls and completes the stretching process.Operates band saw to cut material to size indicated on the planning documents. Places material to be cut onto the saw table surface using various types of material handling equipment. Starts machine and activate controls to complete the sawing process.Places stretched acrylic material on the grinding/polishing table using various types of material handling equipment. Activates vacuum hold down equipment and ensure material is held immovable to the grind/polish machine table. Adjust machine controls to bring polishing wheel into contact with the material. Turns valves to regulate flow of water into polishing head and starts machine.Examines finished material to determine conformance of finish and deformities specifications. Mark or otherwise indicate non-conforming areas of the finished acrylic sheet.Replaces worn grinding and surface conditioning discs and maintains machine in operating condition.Ancillary Job Functions and Responsibilities:Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Requirements
Skills and Work Requirements :
Any kind of mechanical inclination that allows them to read a tape measure and cut parts. Manufacturing and machine use would be helpful for stretch and polish. Able to cross train throughout the area.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
168557917758859
Our client is hiring Line Maintenance Technicians to support live aircraft operations at ILN. This role is ideal for mechanics who thrive under pressure, are quick on their feet, and know how to troubleshoot efficiently to keep aircraft moving. You’ll be working on widebody aircraft with a focus on the 767, supporting one of the busiest logistics hubs in the country.
Essential Duties and Responsibilities
Perform troubleshooting, repairs, and servicing on 767 and other widebody aircraft during scheduled and unscheduled operations
Support pre-flight, transit, and overnight checks, ensuring aircraft airworthiness and safety
Communicate effectively with flight crews, dispatch, and control centers
Document maintenance actions in accordance with FAA and company standards
Respond to AOG situations and ensure quick turnaround for operational aircraft
Requirements
Minimum of 2 years of aircraft maintenance experience (line experience highly preferred)
Must have A&P license
Experience with 767 or other widebody aircraft highly preferred
767 Gen Fam is a highly preferred, if a qualified candidate is approved without the gen fam, they will obtain it during week two of training.
Must be able to read, write, and speak English.
Must be able to pass a 10-year background check and drug screen
Flexibility to work nights, weekends, and holidays in a fast-paced line environment
Miscellaneous
About Our Client
Our client operates one of the most respected heavy maintenance MRO facilities in the country. Located in Wilmington, OH, this site specializes in widebody aircraft—particularly the Boeing 767—and serves major commercial and cargo airlines. With a strong focus on safety, quality, and continuous improvement, the facility offers cutting-edge tools, large-scale projects, and a collaborative team environment. Contractors who demonstrate commitment and performance may have access to Gen Fam training and long-term opportunities. This is a prime location for technicians looking to build experience on widebody aircraft and grow with a leader in the aviation industry.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
309559237835971
The Avionics Technician troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required.
Essential Duties and Responsibilities
Adhere to General Work Requirements (Factory, Shop and / or Hangar positions)
Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
Operate ground support equipment as required
Assist with mechanical / electrical removals and installations
May assist with maintenance at off-site locations
Perform other duties as assigned
Requirements
Min 4+ years of experience as an Avionics Technician
Corporate Jet or commercial aircraft experience preferred
If former military, Depot/Isochronal/Phase inspections are a plus
CRJ airframe experience is a plus
FAA A&P or A license is required.
GROL or AET certification is preferred
Certification from Avionics, Electric A/C Technical school or equivalent military training is preferred
Must have own tools
Must be able to effectively communication in English both verbally and in writing
Must be comfortable with 12hr shift work including days/nights and weekends.
Miscellaneous
About Our Client
For over 130 years our clients innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors.
Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
123635740452038
The Sheetmetal Mechanic will troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.
Essential Duties and Responsibilities
Adhere to clients General Work Requirements
Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner.
Remove / install aircraft components as required
Fabricate and or modify structural modifications on aircraft parts
Perform minor structural repairs on composite components either attached or detached
Assist in conducting hidden damage inspection of aircraft structures
Assist with complex structural repairs either on or off aircraft
Operate ground support equipment as required
Assist with aircraft component repair
Perform mechanical / electrical removals and installations as required
May assist with maintenance at off-site locations
Assist in wing removal as required
Assist maintenance as required
Inspect confined areas of airframe
Assist in designing, modifying and welding metal fixtures as required
Assist in providing time estimates as required
Fabricate sheet and/or composite components
Requirements
Minimum of 5-8 years of structural sheet metal repair and modification experience or sustained similar experience in an MRO / Heavy Maintenance environment.
FAA Airframe and Powerplant (A&P) or Airframe (A) License is required.
CRJ airframe experience required.
Corporate jet aircraft or commercial aircraft experience preferred.
If former military, those with military aircraft maintenance experience such as Depot/Isochronal/Phase inspections is a plus.
Miscellaneous
About Our Client
For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors.
Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
191783367346034
4 years' experience in aircraft repair bonding in an aerospace environment
1st Shift / Monday - Friday / 7am-3:30pm (Must be flexible across shifts, initial assignment will be 1st shift)
Competitive pay DOE
Applies advanced technical skills and knowledge to fabricate, rework and repair metallic and nonmetallic bonded parts and assemblies for operational aircraft applications. Performs any of the detailed work operations required to be completed in this area of specialization.
Essential Duties and Responsibilities
Essential Functions and Key Responsibilities: Performs bonding of metallic and nonmetallic materials to fabricate parts, components and assemblies for aircraft applications using products and processes that are varied and moderately complex to complex in scope. The level of work requires experience and sound judgment. Read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determine equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials. Plans, lays out, fabricates and builds adhesive bonded assemblies of metallic and nonmetallic composite materials. Fabricate composite and metal parts into subassemblies for the purpose of prefitting in preparation for bonding/curing in presses, ovens, and autoclaves. Lays out, prefits, assembles and performs lay-up on a variety of metal to metal and composite bonded assemblies. Fits core in panels where close tolerances are required for installation of details for completion of assembly. Performs vacuum bagging for Autoclave cures up to 100 psi. Lays out and marks dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates. Selects tooling and materials compatible with the processing techniques identified in the work instructions. Performs rework or repair on any metallic or nonmetallic part presented for rework or repair.
Requirements
4 years experience in Aircraft Repair Bonding in an aerospace environment
Special Skills, Licenses or Job Requirements: Demonstrate competency in applying the following in performing normal job duties. • Reading and interpreting work instructions, properly documenting work performed on such documents as process planning, adhesive log sheets, Material Review Board documents, Engineering Work Orders, Change Notices, Engineering Process Specifications, technical manuals and like documentation. • Use close tolerance measuring tools i.e. scales, micrometers, calipers, depth gages and like tools.
Special Training and Behavioral Competencies: • Safety training as required by OSHA. • Intermediate blueprint reading.
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
196389942020060
Seeking skilled Aircraft Upholsterer / Upholstery technicians in East Alton, IL
Essential Duties and Responsibilities
Performing basic to advanced foam build ups, patterning and sewing of seat parts and other upholstery items..
Ability to perform minor modifications,
Perform daily turnover sheets
Maintenance and repair of shop facility, equipment and tooling
Basic computer skills to be able to navigate electronic training, manuals, and maintenance data bases
Cleanliness of shop and surroundings
Work independently when required
Effectively and clearly communicate (i.e., speak, write, read) in English
Any other job-related duties as assigned by supervisor or management.
Requirements
5+ years of corporate/VIP aircraft upholstery experience
Miscellaneous
About Our Client
Our client has built a solid reputation for strong technical expertise and personalized customer service for maintenance and refurbishment of corporate aircraft. They also provide complete FBO services for aircraft in East Alton, Grand Junction and Chattanooga.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
242588980461615
