Jobs Available

81 - 90 of 225 Matches

A&P Mechanic - Direct

Southeast (Marathon, FL)
Posted on 8/28/2026

The A & P Aircraft Mechanic repairs, maintains, and services District aircraft in compliance with the directives and standards of the Federal Aviation Administration and policies and procedures as set forth by the District Board of Commissioners and administered by the Executive Director. The A & P Aircraft Mechanic will be exposed to both inside and outside environmental conditions, noise, vibration, close proximity to moving mechanical parts, working in high places, small confined spaces, exposure to chemicals, fumes, odors and or oils and may be required to wear a respirator and other protective equipment as required. The A & P Aircraft Mechanic will be expected to perform very heavy work (frequently exerting in excess of 50 lbs of force to lift, carry, push, pull, twist, reach, or otherwise move objects) below, above the waist and shoulders.

Essential Duties and Responsibilities

• Check and determine the need and extent of repair and maintenance to be made to District aircraft so that aircraft stays in proper working order. • Perform pre and post flight inspections and maintain District owned aircraft under the periodic inspection program specified by the FAA for charter aircraft in order to provide a reasonable assurance that aircraft are functioning properly. • Fuel aircraft and load with chemicals as required so that aircraft have enough fuel and chemicals for each mission. • Perform equipment calibration prior to missions to ensure proper amounts of chemicals are released from aircraft. • Perform inspections and repairs in order to submit any FAA required documents to the Director of Aircraft Maintenance. • Maintain and rebuild aircraft engines and airframe as needed with an objective of all aircraft being mission ready. • Assist in the design and fabrication or modification of special equipment such as liquid and dry application equipment resulting in fully functioning equipment to assist in the abatement of mosquito populations. • Prepare requisitions and work orders under the direction of the Director of Aircraft Maintenance for parts and materials needed to maintain District aircraft in a state of readiness. • Perform routine maintenance and repair to facilities in order to keep the building in good working order. • Operate forklifts and other ground support equipment as needed to help complete tasks. • Assist ground operations when needed with maintenance, repair, and operation of vehicles and spray equipment as necessary in order to have functioning ground equipment. • Reinforce aircraft operation sites when aircraft operations exceed the capacity of the Aircraft Support Technicians in the field. • Follow Federal and State laws and District policies regarding health and safety to ensure compliance.

Requirements

Knowledge: • Knowledge of FAA rules and regulations governing configuration, restrictions, and modification of aircraft used for aerial pesticide application • Knowledge of the principles and techniques of aircraft maintenance • Knowledge of general maintenance, repair, and servicing techniques Abilities & Skills: • Ability to operate machinery, vehicles, and material handling equipment • Ability to receive instructions and to perform tasks assigned in a safe and efficient manner Education, Training, & Experience: • Completed high school education or equivalent trade school education • Five years experience in aircraft maintenance • Must have an Airframe and Power plant License • Must be licensed in “Public Health Pest Control” from the Department of Agriculture and Consumer Services or able to obtain such certification within one year • Must hold a valid Florida CDL License or receive it within 1 year of hire date. • Must hold a valid forklift certificate in accordance with OSHA: 29 CFR 1910.178

Miscellaneous

The A & P Aircraft Mechanic will be exposed to both inside and outside environmental conditions, noise, vibration, close proximity to moving mechanical parts, working in high places, small confined spaces, exposure to chemicals, fumes, odors and or oils and may be required to wear a respirator and other protective equipment as required. The A & P Aircraft Mechanic will be expected to perform very heavy work (frequently exerting in excess of 50 lbs of force to lift, carry, push, pull, twist, reach, or otherwise move objects) below, above the waist and shoulders.

About Our Client

Our client is the official mosquito control provider for the Florida Keys which is located at the southern tip of the Florida penisula in Monroe County, FL.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

182278987149561

Featured job

Sheetmetal Mechanic

Southeast (PENSACOLA, FL)
Posted on 8/28/2026

A Sheetmetal Mechanic I is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.

Essential Duties and Responsibilities

Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner. Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall. Perform the duties of and provide the necessary training for lower skill levels. Maintain and store tools in a serviceable condition. Adhere to safe maintenance practices and keep a clean work area. Maintain and supply personal records of work performed on OJT forms for the Training Department. Successfully complete any courses deemed necessary by the Training Department. Perform any work that may be assigned by his or her supervisor.

Requirements

1-9 years’ experience of heavy structures on commercial aircraft. Passenger to Cargo conversions is a plus Minimum Required Tools (Etched before Arrival). Operating knowledge of shop equipment to include, drill presses, shears, brakes, and band saws. Capable of performing structural repairs on floor beams, fuselage skin repairs, to include stringers, doublers, and triplers. Capable of performing floor beam, and frame installations / repairs. Capable of performing basic repairs, blend outs, and reinforcing repairs. Corrosion removal, damage evaluation, and finish restoration. Ability to read and interpret SRM damage limits, and repairs. Working knowledge of IPCs. Ability to read, interpret, plan and work from complex SRM’s, Blueprints, Service Bulletins, ADs, EAs, and EO’s. Working knowledge of cold working, roto peening, and freeze plug installations a plus.

Miscellaneous

Candidates must report on first day with 2 forms of acceptable identification to verify employment eligibility. Applicants should plan on one week of orientation/training upon arrival APA offers on site representation Food trucks available daily onsite.

About Our Client

Our Client is located at Brookley Aeroplex in Mobile, Alabama, and Pensacola, FL, at the Pensacola International Airport. They are a renowned provider of aircraft maintenance and modification (AMM) services for commercial airlines and air freight operators. They meet their customers' requirements by providing a full spectrum of high-quality, reliable, and timely AMM and engineering solutions. Our client has the know-how and experience to comprehensively manage complex projects, ensuring the customers' aircraft operate safely and efficiently.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

173778524131641

Featured job

Temp Bonder Assistant

South Central (Tulsa, OK)
Posted on 8/28/2026

Applies knowledge of basic production procedures to assist other stakeholders and learn the processes to fabricate, rework, and repair metallic and nonmetallic bonded parts and assemblies for operational aircraft applications.

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to problems or work situations of a routine or repetitive nature. May perform a variety of routine duties related to any work operation in the manufacturing or repair of company and customer products as required. Assists in performing tasks associated with determining the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials. Assists in planning, fabricating and building adhesive bonded assemblies of metallic and nonmetallic composite materials. Fabricates composite and metal parts into subassemblies for the purpose of prefitting in preparation for bonding/curing in presses, ovens, and autoclaves. Assists in lay out, prefit, and assembly and lay-up of a variety of metal to metal and composite bonded assemblies. May lay out and mark dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates. Performs vacuum bagging for Autoclave cures up to 100 psi. Learns to read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Selects tooling and materials compatible with the processing techniques identified in the work instructions. Ancillary Functions and Responsibilities: Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.

Requirements

High School Diploma, GED or equivalent. Previous work experience in a manufacturing environment preferred, but not required. Must be able to use small hand tools and machinery.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

344973500646447

Featured job

A&P Mechanic III

Midwest (Grand Junction, CO)
Posted on 8/28/2026

Seeking experienced A&P Mechanics to perform aircraft maintenance, inspections, troubleshooting, repairs, and modifications in a maintenance, repair, and overhaul (MRO) environment. This position supports a variety of aircraft platforms and offers the opportunity to work alongside a highly skilled maintenance team while ensuring all work is completed in accordance with FAA regulations, manufacturer specifications, and company quality standards.

Essential Duties and Responsibilities

Perform scheduled and unscheduled maintenance on aircraft and aircraft systems. Troubleshoot and repair airframe, engine, electrical, hydraulic, pneumatic, and mechanical systems. Conduct inspections in accordance with FAA regulations and company procedures. Read and interpret maintenance manuals, wiring diagrams, engineering drawings, and technical data. Complete accurate maintenance records and required documentation. Remove, install, test, and adjust aircraft components and systems. Perform operational and functional checks following maintenance activities. Maintain a safe, clean, and organized work environment. Follow all company safety, quality, and regulatory requirements. Assist with aircraft modifications, repairs, and return-to-service activities as assigned.

Requirements

Minimum Qualifications FAA Airframe & Powerplant (A&P) License required. Minimum 3 years of hands-on aircraft maintenance experience OR 2 years of corporate/business aviation maintenance experience. Experience performing inspections, troubleshooting, repairs, and maintenance on aircraft systems. Ability to read and interpret maintenance manuals, engineering drawings, wiring diagrams, and technical data. Strong troubleshooting and diagnostic skills. Must have own tools required to perform assigned duties. Ability to work overtime, weekends, and flexible schedules as needed. Preferred Qualifications Previous MRO, service center, corporate aviation, military, or commercial aircraft maintenance experience. Experience with major inspections, modifications, and return-to-service activities. Familiarity with FAA regulations, maintenance record keeping, and quality standards. Experience working independently with minimal supervision.

Miscellaneous

About Our Client

Our client is a leading provider of aircraft maintenance, repair, and overhaul (MRO) services, supporting a wide range of business aviation and special mission aircraft. With a strong reputation for quality workmanship, technical expertise, and customer service, they deliver comprehensive maintenance, inspection, modification, and avionics solutions from state-of-the-art facilities across the United States. Committed to safety, reliability, and operational excellence, our client invests in both advanced technology and skilled aviation professionals to ensure every aircraft is maintained to the highest standards. Their team-oriented culture provides employees with opportunities for career growth, ongoing training, and exposure to diverse aircraft platforms within a fast-paced aviation environment.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

197095805474250

Featured job

Avionics Technician

West (Everett, WA)
Posted on 8/28/2026

Performs routine repairs, checks and installations of all Avionics systems on Boeing VIP aircraft

Essential Duties and Responsibilities

Within budgeted or estimated time, repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance. Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents. Accurately document work performed as set forth maintenance programs on a daily basis using the standard format. Prepare routine reports and correspondence. Fabricate per drawings and standard practices wire bundles and assemblies to include marking of wires, properly securing wires into bundles, and termination of wires into a variety of contacts and connectors.

Requirements

3-5 years of Avionics Experience on Boeing Aircraft Boeing 737 and 767 experience is preferred Must have working knowledge of Avionics systems and their operation and the proven ability to troubleshoot basic problems. Must have broad, overall knowledge of other aircraft systems e.g. hydraulic, flight controls, etc. and major components. High school diploma or GED

Miscellaneous

About Our Client

Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

198070699796773

Featured job

A&P Mechanic Lead

Midwest (Grand Junction, CO)
Posted on 8/28/2026

Seeking an experienced Lead A&P Mechanic to oversee aircraft maintenance activities while providing technical leadership and mentorship to a team of maintenance professionals. This position is responsible for coordinating workflow, ensuring quality and compliance standards are met, and assisting with maintenance, inspections, troubleshooting, repairs, and modifications on a variety of aircraft. The ideal candidate will bring strong technical expertise, leadership skills, and a commitment to safety, quality, and operational excellence.

Essential Duties and Responsibilities

Lead and coordinate daily maintenance activities to support production schedules and operational goals. Provide technical guidance, mentorship, and support to maintenance team members. Assign work, monitor progress, and ensure tasks are completed efficiently and accurately. Perform scheduled and unscheduled maintenance on aircraft and aircraft systems. Troubleshoot and repair airframe, engine, electrical, hydraulic, pneumatic, and mechanical systems. Conduct inspections in accordance with FAA regulations and company procedures. Review maintenance work to ensure compliance with quality standards and regulatory requirements. Read and interpret maintenance manuals, engineering drawings, wiring diagrams, and technical data. Complete and review maintenance documentation for accuracy and completeness. Coordinate with management, quality personnel, and other departments to resolve maintenance issues. Promote a safe, clean, and organized work environment. Support aircraft modifications, major repairs, and return-to-service activities.

Requirements

Minimum Qualifications FAA Airframe & Powerplant (A&P) License required. Minimum 7 years of hands-on aircraft maintenance experience. Previous corporate/business aviation experience OR leadership experience supervising teams of 5 or more direct reports. Strong troubleshooting, diagnostic, and problem-solving skills. Ability to read and interpret maintenance manuals, engineering drawings, wiring diagrams, and technical data. Working knowledge of FAA regulations, maintenance procedures, and documentation requirements. Must possess strong communication, organizational, and leadership skills. Must have own tools required to perform assigned duties. Ability to work overtime, weekends, and flexible schedules as needed. Preferred Qualifications Previous experience in a Lead Mechanic, Crew Lead, Supervisor, or Team Lead role. Experience in an MRO, service center, corporate aviation, military, or commercial aircraft maintenance environment. Experience with major inspections, modifications, and heavy maintenance events. Ability to lead projects and coordinate multiple maintenance activities simultaneously. Experience mentoring and developing junior technicians.

Miscellaneous

About Our Client

Our client is a leading provider of aircraft maintenance, repair, and overhaul (MRO) services, supporting a wide range of business aviation and special mission aircraft. With a strong reputation for quality workmanship, technical expertise, and customer service, they deliver comprehensive maintenance, inspection, modification, and avionics solutions from state-of-the-art facilities across the United States. Committed to safety, reliability, and operational excellence, our client invests in both advanced technology and skilled aviation professionals to ensure every aircraft is maintained to the highest standards. Their team-oriented culture provides employees with opportunities for career growth, ongoing training, and exposure to diverse aircraft platforms within a fast-paced aviation environment.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

122542159656863

Featured job

A&P Mechanic

South Central (Ardmore, OK)
Posted on 8/28/2026

A&P Mechanic will perform skilled work to identify, remove, and install aircraft components and to perform servicing of engines and aircraft accessories to ensure airworthiness according to customer specifications and FAA standards.

Essential Duties and Responsibilities

Primary duties will be flight control Removals, balancing and reinstallation as well as panels and aerodynamic fairing removal and re installations as well as defueling. Perform skilled work to identify, remove, and install aircraft components Perform servicing of engines and aircraft accessories Remove and install aircraft engines Rig and adjust aircraft secondary systems

Requirements

Minimum of 3 years experience as an A&P Mechanic with experience on Dash-8 or King Air aircraft Must be fluent in English. A&P license required High School Diploma or Equivalent Bring your own tools, they must be etched and shadowed and shall be identified with a number unique to the owner.

Miscellaneous

Facial Hair – Beards and mustaches, if worn, will be neatly trimmed to an approximate ¼” maximum. Short, evenly trimmed sideburns are allowed. Tattoos – Visible tattoos are allowed on arms and legs if they are not discriminatory based on racial, sexual, religious, ethnic, or other characteristics or attributes of a sensitive nature. These include the prohibition of any tattoos commonly associated with gangs, extremists and/or supremacist organizations or discrimination. Tattoos, brandings or body marks on the head, neck, face, tongue, lips, and/or scalp are prohibited. Hand tattoos are limited to one single-band ring tattoo, on one finger, on one hand. Shoes – When working in safety and/or industrial flight line environment, shoes must follow OSHA guidelines.

About Our Client

For over 20 years, our client has been providing outstanding aviation services on a global basis to operators of large corporate and VIP aircraft.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

200539301999806

Featured job

A&P Mechanic III

Midwest (East Alton, IL)
Posted on 8/28/2026

Seeking experienced A&P Mechanics to perform aircraft maintenance, inspections, troubleshooting, repairs, and modifications in a maintenance, repair, and overhaul (MRO) environment. This position supports a variety of aircraft platforms and offers the opportunity to work alongside a highly skilled maintenance team while ensuring all work is completed in accordance with FAA regulations, manufacturer specifications, and company quality standards.

Essential Duties and Responsibilities

Perform scheduled and unscheduled maintenance on aircraft and aircraft systems. Troubleshoot and repair airframe, engine, electrical, hydraulic, pneumatic, and mechanical systems. Conduct inspections in accordance with FAA regulations and company procedures. Read and interpret maintenance manuals, wiring diagrams, engineering drawings, and technical data. Complete accurate maintenance records and required documentation. Remove, install, test, and adjust aircraft components and systems. Perform operational and functional checks following maintenance activities. Maintain a safe, clean, and organized work environment. Follow all company safety, quality, and regulatory requirements. Assist with aircraft modifications, repairs, and return-to-service activities as assigned.

Requirements

Minimum Qualifications FAA Airframe & Powerplant (A&P) License required. Minimum 3 years of hands-on aircraft maintenance experience OR 2 years of corporate/business aviation maintenance experience. Experience performing inspections, troubleshooting, repairs, and maintenance on aircraft systems. Ability to read and interpret maintenance manuals, engineering drawings, wiring diagrams, and technical data. Strong troubleshooting and diagnostic skills. Must have own tools required to perform assigned duties. Ability to work overtime, weekends, and flexible schedules as needed. Preferred Qualifications Previous MRO, service center, corporate aviation, military, or commercial aircraft maintenance experience. Experience with major inspections, modifications, and return-to-service activities. Familiarity with FAA regulations, maintenance record keeping, and quality standards. Experience working independently with minimal supervision.

Miscellaneous

About Our Client

Our client is a leading provider of aircraft maintenance, repair, and overhaul (MRO) services, supporting a wide range of business aviation and special mission aircraft. With a strong reputation for quality workmanship, technical expertise, and customer service, they deliver comprehensive maintenance, inspection, modification, and avionics solutions from state-of-the-art facilities across the United States. Committed to safety, reliability, and operational excellence, our client invests in both advanced technology and skilled aviation professionals to ensure every aircraft is maintained to the highest standards. Their team-oriented culture provides employees with opportunities for career growth, ongoing training, and exposure to diverse aircraft platforms within a fast-paced aviation environment.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

194384393290475

Featured job

Aircraft Painter 7

Midwest (Wichita, KS)
Posted on 8/28/2026

As an Aircraft Painter, you will contribute to the preparation, application, and finishing of aircraft surfaces to meet customer specifications and quality standards. Your role involves ensuring all work complies with safety protocols, regulations, and customer expectations while delivering polished, professional results.

Essential Duties and Responsibilities

Adhere to Company General Work Requirements (Factory, Shop and/or Hangar positions). Comply with environmental health, safety policies and procedures; participate in 5-S activities and perform all work in a safe and timely manner. Perform surface preparation on aircraft and component parts. Apply primer, topcoat and final spray Polish painted surfaces for finished appearance. Inspect, perform touch-up and polish painted surfaces for a finished appearance. Install sealant and erosion tape. Performs and documents all work performed per appropriate manuals and regulations as required. Layout aircraft to customer specifications

Requirements

Minimum of 4 year of aircraft painting experience Satisfactory results on Pulmonary Function evaluation in order to obtain respirator certification. Formal vocational training or equivalent. Customer service and aviation work experience. Basic PC skills. Basic knowledge pulling maintenance manuals and IPCs from computer. Basic knowledge of regulations dealing with transportation of hazardous materials. Ability to communicate in both written and verbal form on individual and/or aircraft status. Ability to interpret and work with mechanical engineering drawings.

Miscellaneous

Ability to work in a fast-paced and dynamic environment Opportunity for growth and skill development in a leading aerospace company

About Our Client

Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

765218188350258

Featured job

A&P Mechanic IV

Midwest (Grand Junction, CO)
Posted on 8/28/2026

Seeking experienced A&P Mechanics to perform aircraft maintenance, inspections, troubleshooting, repairs, and modifications in a maintenance, repair, and overhaul (MRO) environment. This position supports a variety of aircraft platforms and offers the opportunity to work alongside a highly skilled maintenance team while ensuring all work is completed in accordance with FAA regulations, manufacturer specifications, and company quality standards.

Essential Duties and Responsibilities

Perform scheduled and unscheduled maintenance on aircraft and aircraft systems. Troubleshoot and repair airframe, engine, electrical, hydraulic, pneumatic, and mechanical systems. Conduct inspections in accordance with FAA regulations and company procedures. Read and interpret maintenance manuals, wiring diagrams, engineering drawings, and technical data. Complete accurate maintenance records and required documentation. Remove, install, test, and adjust aircraft components and systems. Perform operational and functional checks following maintenance activities. Maintain a safe, clean, and organized work environment. Follow all company safety, quality, and regulatory requirements. Assist with aircraft modifications, repairs, and return-to-service activities as assigned.

Requirements

Minimum Qualifications FAA Airframe & Powerplant (A&P) License required. Minimum 5 years of hands-on aircraft maintenance experience OR 3 years of corporate/business aviation maintenance experience. Experience performing inspections, troubleshooting, repairs, and maintenance on aircraft systems. Ability to read and interpret maintenance manuals, engineering drawings, wiring diagrams, and technical data. Strong troubleshooting and diagnostic skills. Must have own tools required to perform assigned duties. Ability to work overtime, weekends, and flexible schedules as needed. Preferred Qualifications Previous MRO, service center, corporate aviation, military, or commercial aircraft maintenance experience. Experience with major inspections, modifications, and return-to-service activities. Familiarity with FAA regulations, maintenance record keeping, and quality standards. Experience working independently with minimal supervision.

Miscellaneous

About Our Client

Our client is a leading provider of aircraft maintenance, repair, and overhaul (MRO) services, supporting a wide range of business aviation and special mission aircraft. With a strong reputation for quality workmanship, technical expertise, and customer service, they deliver comprehensive maintenance, inspection, modification, and avionics solutions from state-of-the-art facilities across the United States. Committed to safety, reliability, and operational excellence, our client invests in both advanced technology and skilled aviation professionals to ensure every aircraft is maintained to the highest standards. Their team-oriented culture provides employees with opportunities for career growth, ongoing training, and exposure to diverse aircraft platforms within a fast-paced aviation environment.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

790417669633529

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs