Jobs Available

111 - 120 of 141 Matches

Sheetmetal Mechanic

Southeast (Tampa, FL)
Posted on 6/26/2025

This Sheetmetal Mechanic is responsible for fabricating, repairing, replacing, or rebuilding aircraft structures, repair parts, and special tools, in accordance with policies, procedures, requirements, and specifications established by the company, applicable government agencies, and aircraft manufactures as contained in approved Maintenance Manuals.

Essential Duties and Responsibilities

Must have working knowledge and the ability to fabricate, repair, replace, or rebuild aircraft structures, repair parts, and special tools. Heavy phase maintenance experience on other military aircraft types may be considered. Works according to written and/or verbal instructions. Performs all work assigned in accordance with approved maintenance procedures. Records work performed and assumes responsibility for that work as indicated by his/her signature. Uses blueprints, schematics, technical drawings, and Maintenance Manuals in performance of assigned duties. Performs touch up painting as needed (within task area). May do experimental and developmental work as assigned.

Requirements

Two (2) years’ experience in heavy aircraft maintenance, preferably with an airline and/or MRO aircraft company. Must have thorough working knowledge of all forms and documents required to support heavy maintenance service, including, but not limited to Company policy and procedure manuals, FAR’s, AD’s, Service Bulletins, and Maintenance Manuals. Able to read and interpret technical manuals, instructions, blueprints, and drawings. Efficient in the use and application of tools, gauges, instruments, etc. necessary for the accomplishment of duties assigned. Must have an understanding and working knowledge of hazardous material handling and disposal as related to the job assignment. Valid and current Airframe and Powerplant license is a plus. Must have minimum required tools. Meet the qualifications to obtain a SIDA badge. High School diploma or equivalent.

Miscellaneous

MUST be able to pass a 10 year federal background check in order to obtain an airport security badgeEach candidate tracking in will receive either an Airbus Training or Boeing Training (Gen Fam); at no cost to the employee

About Our Client

On the MRO side of the business, our client provides best-in-class services ranging from light repairs to full heavy maintenance visits. On the cargo conversion side, our client provides the very best technical solutions at sensible economics to ensure that freighter operators have sustainable market advantages.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

378293634510818

Avionics Technician

Southeast (Piney Flats, TN)
Posted on 6/25/2025

Ability to read and interpret electrical schematics

Essential Duties and Responsibilities

Avionics repair and system installation. Testing and maintaining electrical systems, to include troubleshooting, flight testing, and compass swings. Perform system configurations and use test equipment to perform system checks. Complete VSWR checks. Fabrication of custom sheet metal items. Installing wires and building wiring harnesses. Interface with customers /customer interaction required at times. Ability to read and interpret electrical schematics Be familiar with all hand tools applicable for the tasks Fabricate wiring harnesses Installation of wiring harnesses Termination of wiring harnesses Clamping of wiring harnesses Able to use a multimeter Assist with operational testing of avionics systems Troubleshoot systems as required

Requirements

Must have 5+ years of avionics experience Must be able to run and terminate wires FAA A&P or A certificate would be a plus. High School Diploma/GED or equivalent Additional training in electrical installations or wiring may be a plus. Willing to work overtime and weekends as necessary. Can handle a high tempo high stress environment. Ability to fabricate wiring harnesses a plus. Ability to read and understand installation instructions, maintenance manuals and blueprints. Ability to solve routine problems and to work with limited supervision. Must work as a team member to ensure quality and timely completion of aircraft to meet schedule.

Miscellaneous

Physical requirements: Ability to sit, stand, crawl, climb ladders, and work in tight spaces as required. Ability to stand for long periods of time, up to duration of shift. Ability to lift 25 lbs.

About Our Client

Headquartered in Fort Worth, Texas –Our Rotary wing client has strategic locations around the globe. Their talented employees come from over 90 countries to serve customers from 120. All to deliver exceptional aircraft experiences. Efficiently. Reliably. And, above all, safely.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

112231913020039

Temp Acrylic Fabricator Assistant

South Central (Tulsa, OK)
Posted on 6/25/2025

Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned. Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions. Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications. Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions. Installs rivets, bolts, screws and clips and prepares and applies adhesives. Inspects assemblies and installation for conformance to specifications. Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses. Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.

Requirements

High School Diploma or GED Must be able to use small hand tools and machinery Previous manufacturing experience preferred.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

977387823069046

Temp Fabricator Assembler

South Central (Tulsa, OK)
Posted on 6/25/2025

Applies basic and some advanced technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.

Essential Duties and Responsibilities

Lays out and marks dimensions and reference lines on material with or without templates or shop aides. Routes, saws, drills or otherwise change and add value to detail parts and subassemblies according to work instructions. Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions. Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications. Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions. Installs rivets, bolts, screws and clips and prepares and applies adhesives. Inspects assemblies and installation for conformance to specifications. Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses. Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.

Requirements

Two (2) to four (4) or more years of experience in fabrication and assembly of metallic and non-metallic parts used on operational aircraft, or equivalent combination of education, training and experience.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

948881571453135

Temp Acrylic Fabricator Assistant

South Central (Tulsa, OK)
Posted on 6/25/2025

Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned. Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions. Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications. Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions. Installs rivets, bolts, screws and clips and prepares and applies adhesives. Inspects assemblies and installation for conformance to specifications. Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses. Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.

Requirements

High School Diploma or GED Must be able to use small hand tools and machinery Previous manufacturing experience preferred.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

100887799322348

A&P Mechanic

Southeast (Fort Lauderdale, FL)
Posted on 6/25/2025

The A&P Mechanic will be performing scheduled and unscheduled maintenance on helicopters.

Essential Duties and Responsibilities

Perform aircraft disassembly and reassembly. Performing major and minor repairs and alterations to aircraft structure, including sheet metal and composite repairs and fabrications. Perform post maintenance flight test duties. Fabrication of mounting provisions for avionics installations. Other tasks as assigned.

Requirements

2 + years of heavy helicopter maintenance experience on Bell helicopters, preferably in FAA 145 Repair Station. A&P certificate Must purchase or own tools required for the jobs assigned. Ability to install kits on new aircraft (to include air conditioners, sliding doors, rescue hoists, FAST rope systems, etc.). Ability to perform maintenance on airframe and engine as needed, to include removal and replacement of engine and major airframe components. Ability to perform sheet metal repairs and to fabricate sheet metal and composite parts as required. Ability to troubleshoot and solve routine problems as needed. Ability to work under limited supervision, and to assist and train junior mechanics as required. Ability to read and understand installation instructions, maintenance manuals and blueprints. Ability to follow written and verbal instructions. Ability to measure, drill and modify aircraft structures without causing damage to structure or underlying components. Must work as a team member to ensure quality and timely completions of aircraft to meet schedule. Must work overtime as required. Ability to sit, stand, crawl, climb ladders, and work in tight spaces as required. Ability to stand as required for duration of shift. Able to lift 25 lbs.

Miscellaneous

About Our Client

Headquartered in Fort Worth, Texas –Our Rotary wing client has strategic locations around the globe. Their talented employees come from over 90 countries to serve customers from 120. All to deliver exceptional aircraft experiences. Efficiently. Reliably. And, above all, safely.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

938243256489565

QC Inspector

West (Tucson, AZ)
Posted on 6/25/2025

APA is seeking a Quality Inspector at a FAA-rated Repair Station in Tucson, AZ. This role ensures airworthiness of aircraft, engines, and components through inspections, accurate documentation, and compliance with FAA (and other international authorities like TCCA/EASA) standards. You’ll be on the front lines of quality assurance—checking incoming materials, guiding inspections, and signing off on return-to-service efforts for commercial and military aircraft.

Essential Duties and Responsibilities

Inspect maintenance, repairs, preventative maintenance, and alterations per FAA 145 regulations Conduct walk-around inspections to confirm return-to-service readiness . Perform detailed checks of all incoming parts and materials using precision tools (calipers, micrometers, depth gauges) Inspect repaired or rebuilt components for damage, count, and conformity Verify outgoing materials meet purchase order, engineering, and regulatory specs; issue Authorized Release Certificates (e.g., FAA Form 8130, TCCA Form One) Ensure all records—arrival, maintenance, corrective actions—are logged in the system, and that regulatory (FAA, FAR, CAA, TCCA, EASA) and customer-specific paperwork are complete Research drawings, engineering orders, maintenance records, and configuration data to verify standards Conduct internal audits and procedural checks to ensure firm compliance Ensure weighing protocols and other technical procedures are followed per customer specs Mentor, train, and coach technicians and junior inspectors in best practices Collaborate with Engineering and Material Review Boards to resolve non-conformances Provide inspection-related data and certification info to customers as requested

Requirements

Min 3+ years experience performing aircraft inspections under FAR 145, 121, or 135 OR military experience on commercial/military aircraft CRJ airframe experience REQUIRED MRO/Heavy Maintenance experience REQUIRED MUST be willing to convert to a permanent position after completing six (6) months on contract. FAA A&P License REQUIRED Must have working knowledge of special tooling and machinery used in detail inspection, as well as aircraft part fabrication process. Ability to calculate tolerances using specialty/calibrated measuring devices. Able to use and interpret a variety of precision measurement instruments and special tooling. Ability to read and interpret engineering documents Must be able to pass hearing and vision tests. Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing. Must be comfortable with 12hr shift work, including days/nights and weekends.

Miscellaneous

About Our Client

For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors. Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

131290060628150

Temp Material Handler II

South Central (Tulsa, OK)
Posted on 6/25/2025

Applies moderate to advanced knowledge of material handler processes and skills.

Essential Duties and Responsibilities

Kit production and service orders from warehouse inventory. Perform cycle counts and inventory adjustments, complete material put away and issue, pick up and deliver materials from production storage areas, provide customer service for stakeholders with warehouse or shipping needs, bag and tag parts, load and unload trucks, assemble and pack/unpack containers for shipping/receiving.

Requirements

No formal education required. One (1) to two (2) or more years' work experience in a manufacturing environment. Must be able to use / operate small hand tools and machinery.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

132174020213819

Temp Aerostructure Repair Mechanic A

South Central (Tulsa, OK)
Posted on 6/25/2025

The Sheet Metal Mechanic is responsible for assembling and/or repairing of aircraft parts, components, subsystems and operating systems.

Essential Duties and Responsibilities

Reads work instructions including production planning, engineering drawings, full size Mylar layouts, process specifications and other technical documentation to insure proper detail configuration. Determines dimensions to layout holes patterns, install clips, brackets, nut plates and like items. Lays out and marks dimensions and reference lines on material with or without templates or shop aides to develop or back drill hole patterns on composite, sheet metal and mechanical parts. Trims sheet metal and composite parts to fit and files, grinds, deburrs, buffs, and smooths surfaces. Installs assemblies in assembly jigs, fixtures or other tooling according to work instructions. Assembles parts into subassemblies and final assemblies using basic hand tools such as, drill motors, die grinders, sanders, polishers, rivet shavers and other like tools. Drills holes of varying sizes in detail parts and subassemblies according to work instructions. Installs blind rivets, Jo-Bolts, hilocks, huck bolts, solid rivets and bolts, drives and bucks rivets to attach and assemble detail parts to structural parts and complete subassemblies to written and verbal work instructions. Inspects completed assemblies for conformance to specifications. Completes and maintains necessary paperwork for documenting processes performed.

Requirements

High School Diploma or GED Two (2) or more years of major aircraft structural assembly. Miscellaneous: Must provide own tools

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

144567921734963

Upholsterer / Upholstery Technician

Northeast (Bangor, ME)
Posted on 6/25/2025

Seeking experienced Upholstery Techs in Bangor, Maine

Essential Duties and Responsibilities

Sewing seats, fitting foam, cutting/sewing leather, etc The ability to read and use design/engineering drawings and aircraft specifications Stripping, chemical cleaning, repair, and covering of flat panels, bulkheads, and seat panels Work with fabric, vinyl, leather hides, composites, and other materials using specified adhesives, sewing equipment, hardware, hand tools, and various power tools Cut and surge carpets Layout and inspect leather hiders defects Trace and cut out seat patterns Installation of window panels, headliners, upper sidewalls, lower sidewalls, and baggage panels in aircraft May sew and upholster covers using designs, engineering drawings, and aircraft specifications Work with lead and higher skilled technicians to develop and implement process improvement techniques that increase safety, reduce costs, cycle time, and man-hours Ensure protection of aircraft interiors in and outside the aircraft

Requirements

minimum of 3 years Aviation Upholstery experience. Experience sewing leather. Preference given to Regional, VIP, & Corporate experience

Miscellaneous

About Our Client

Our client is a global aviation services and aftermarket-support provider for regional and corporate aircraft specializing in quality parts, service, sales, leasing, maintenance, aircraft refurbishment and aircraft re-marketing. This client maintains a state-of-the-art 120,000 square-foot facility at Bangor International Airport in Maine, where for more than 20 years, aircraft have been coming for maintenance and inspections.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

886083726003442

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs