Find the right job for your preferred location and specialty
Jobs Available
91 - 100 of 184 Matches
The A & P Aircraft Mechanic repairs, maintains, and services District aircraft in compliance with the directives and standards of the Federal Aviation Administration and policies and procedures as set forth by the District Board of Commissioners and administered by the Executive Director.
Essential Duties and Responsibilities
Check and determine the need and extent of repair and maintenance to be made to District aircraft so that aircraft stays in proper working order.
Perform pre and post flight inspections and maintain District owned aircraft under the periodic inspection program specified by the FAA for charter aircraft in order to provide a reasonable assurance that aircraft are functioning properly.
Fuel aircraft and load with chemicals as required so that aircraft have enough fuel and chemicals for each mission.
Perform equipment calibration prior to missions to ensure proper amounts of chemicals are released from aircraft.
Perform inspections and repairs in order to submit any FAA required documents to the Director of Aircraft Maintenance.
Maintain and rebuild aircraft engines and airframe as needed with an objective of all aircraft being mission ready.
Assist in the design and fabrication or modification of special equipment such as liquid and dry application equipment resulting in fully functioning equipment to assist in the abatement of mosquito populations.
Prepare requisitions and work orders under the direction of the Director of Aircraft Maintenance for parts and materials needed to maintain District aircraft in a state of readiness.
Perform routine maintenance and repair to facilities in order to keep the building in good working order.
Operate forklifts and other ground support equipment as needed to help complete tasks.
Assist ground operations when needed with maintenance, repair, and operation of vehicles and spray equipment as necessary in order to have functioning ground equipment.
Reinforce aircraft operation sites when aircraft operations exceed the capacity of the Aircraft Support Technicians in the field.
Follow Federal and State laws and District policies regarding health and safety to ensure compliance.
Since our organization is going to change to meet the needs of public health, environmental conservation, and the District, you can expect, anticipate, and assume that your job description will change to meet these challenges.
Requirements
Knowledge:
Knowledge of FAA rules and regulations governing configuration, restrictions, and modification of aircraft used for aerial pesticide application
Knowledge of the principles and techniques of aircraft maintenance
Knowledge of general maintenance, repair, and servicing techniques
Abilities & Skills:
Ability to operate machinery, vehicles, and material handling equipment
Ability to receive instructions and to perform tasks assigned in a safe and efficient manner
Education, Training, & Experience:
Completed high school education or equivalent trade school education
Five years experience in aircraft maintenance
Must have an Airframe and Power plant License
Must be licensed in “Public Health Pest Control” from the Department of Agriculture and Consumer Services or able to obtain such certification within one year
Must hold a valid Florida CDL License or receive it within 1 year of hire date.
Must hold a valid forklift certificate in accordance with OSHA: 29 CFR 1910.178
Miscellaneous
The A & P Aircraft Mechanic will be exposed to both inside and outside environmental conditions, noise, vibration, close proximity to moving mechanical parts, working in high places, small confined spaces, exposure to chemicals, fumes, odors and or oils and may be required to wear a respirator and other protective equipment as required. The A & P Aircraft Mechanic will be expected to perform very heavy work (frequently exerting in excess of 50 lbs of force to lift, carry, push, pull, twist, reach, or otherwise move objects) below, above the waist and shoulders.
About Our Client
Our client is the official mosquito control provider for the Florida Keys which is located at the southern tip of the Florida penisula in Monroe County, FL.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
137178370796273
Our client is hiring Structures Mechanics to join their widebody heavy maintenance team. If you've got sheet metal skills and a passion for aircraft structure repair—this is your runway.
Essential Duties and Responsibilities
Perform structural modifications and repairs on 767 and other widebody aircraft
Use SRMs, blueprints, and engineering drawings to execute precise work
Remove and install panels, stringers, frames, doublers, and other structural components
Collaborate with inspectors and production control for timely task completion
Complete repair documentation and follow safety/quality protocols
Requirements
Minimum of 1 year of experience in aircraft structures or sheet metal repair
Required A or A&P License
Experience with 767 or other widebody aircraft strongly preferred
767 Gen Fam is a huge advantage—contractors may be eligible to attend after 6 months
Must be able to read, write, and speak English
Must be able to pass a 10-year background check and drug screen
Miscellaneous
About Our Client
Our client operates one of the most respected heavy maintenance MRO facilities in the country. Located in Wilmington, OH, this site specializes in widebody aircraft—particularly the Boeing 767—and serves major commercial and cargo airlines. With a strong focus on safety, quality, and continuous improvement, the facility offers cutting-edge tools, large-scale projects, and a collaborative team environment. Contractors who demonstrate commitment and performance may have access to Gen Fam training and long-term opportunities. This is a prime location for technicians looking to build experience on widebody aircraft and grow with a leader in the aviation industry.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
807293204466877
The Composite Technician is responsible for fabrication, rework and repair of metallic and nonmetallic bonded parts for operational aircraft.
Essential Duties and Responsibilities
Performs bonding of metallic or nonmetallic materials to fabricate parts for aircraft applications using products and processes are varied but generally not complex in scope. The level of work performed requires some skill and experience. Works under regular supervision applying standard procedures and solutions to meet work requirements. Priorities are determined by management.
Reads and interprets blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings.
Determines equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials.
Plans, lays out, fabricates and builds adhesive bonded assemblies of metallic and nonmetallic composite materials.
Fabricate composite and metal parts into subassemblies for the purpose of pre-fitting in preparation for bonding/curing in presses, ovens, and autoclaves.
Lays out, prefits, assemble and performs lay-up on a variety of metal to metal and composite bonded assemblies.
Fits core in panels where close tolerances are required for installation of details for completion of assembly.
Performs vacuum bagging for Autoclave cures up to 100 psi.
Lays out and marks dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates.
Selects tooling and materials compatible with the processing techniques identified in the work instructions.
Requirements
High School Diploma or GED
Four (4) years of composite experience
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
127235962773960
The Sheet Metal Mechanic is responsible for assembling and/or repairing of aircraft parts, components, subsystems and operating systems.
Essential Duties and Responsibilities
Reads work instructions including production planning, engineering drawings, full size Mylar layouts, process specifications and other technical documentation to insure proper detail configuration.
Determines dimensions to layout holes patterns, install clips, brackets, nut plates and like items.
Lays out and marks dimensions and reference lines on material with or without templates or shop aides to develop or back drill hole patterns on composite, sheet metal and mechanical parts.
Trims sheet metal and composite parts to fit and files, grinds, deburrs, buffs, and smooths surfaces.
Installs assemblies in assembly jigs, fixtures or other tooling according to work instructions.
Assembles parts into subassemblies and final assemblies using basic hand tools such as, drill motors, die grinders, sanders, polishers, rivet shavers and other like tools.
Drills holes of varying sizes in detail parts and subassemblies according to work instructions.
Installs blind rivets, Jo-Bolts, hilocks, huck bolts, solid rivets and bolts, drives and bucks rivets to attach and assemble detail parts to structural parts and complete subassemblies to written and verbal work instructions.
Inspects completed assemblies for conformance to specifications.
Completes and maintains necessary paperwork for documenting processes performed.
Requirements
High School Diploma or GED
Two (2) or more years of major aircraft structural assembly.
Miscellaneous:
Must provide own tools
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
148640297274824
As an Aircraft Painter, you will contribute to the preparation, application, and finishing of aircraft surfaces to meet customer specifications and quality standards. Your role involves ensuring all work complies with safety protocols, regulations, and customer expectations while delivering polished, professional results.
Essential Duties and Responsibilities
Adhere to Company General Work Requirements (Factory, Shop and/or Hangar positions).
Comply with environmental health, safety policies and procedures; participate in 5-S activities and perform all work in a safe and timely manner.
Perform surface preparation on aircraft and component parts.
Apply primer, topcoat and final spray
Polish painted surfaces for finished appearance.
Inspect, perform touch-up and polish painted surfaces for a finished appearance.
Install sealant and erosion tape.
Performs and documents all work performed per appropriate manuals and regulations as required.
Layout aircraft to customer specifications
Requirements
Minimum of 4 year of aircraft painting experience
Satisfactory results on Pulmonary Function evaluation in order to obtain respirator certification.
Formal vocational training or equivalent.
Customer service and aviation work experience.
Basic PC skills.
Basic knowledge pulling maintenance manuals and IPCs from computer.
Basic knowledge of regulations dealing with transportation of hazardous materials.
Ability to communicate in both written and verbal form on individual and/or aircraft status.
Ability to interpret and work with mechanical engineering drawings.
Miscellaneous
Ability to work in a fast-paced and dynamic environment Opportunity for growth and skill development in a leading aerospace company
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
765218188350258
We are seeking an experienced Quality Assurance Lead for a premier corporate aviation maintenance operation in Bay City, Wisconsin. This position supports aircraft inspections, compliance reviews, maintenance oversight, and return-to-service activities within a fast-paced FAA Part 145 environment.
The client is looking for a detail-oriented QA professional with strong corporate aircraft maintenance knowledge and inspection experience. This role is responsible for ensuring all maintenance work meets FAA regulations, manufacturer specifications, and internal quality standards before aircraft are returned to service.
This is an excellent opportunity for an experienced aviation quality professional looking to join a high-standard corporate aviation maintenance team with strong long-term career potential.
Essential Duties and Responsibilities
Perform in-process and final inspections on aircraft maintenance, repairs, and modifications to ensure compliance with FAA regulations and company standards
Review maintenance documentation, logbook entries, corrective actions, and work orders for accuracy and regulatory compliance
Verify airworthiness of aircraft prior to return-to-service approvals
Inspect airframe, powerplant, structural, avionics, and interior maintenance work performed by technicians
Interpret maintenance manuals, engineering drawings, service bulletins, airworthiness directives, and technical data
Ensure all work is completed in accordance with FAR Part 43, Part 145, and applicable manufacturer specifications
Coordinate with maintenance technicians, leads, and management to resolve discrepancies and maintain quality standards
Support audits, compliance reviews, and regulatory inspections as needed
Identify quality concerns and work proactively to prevent repeat discrepancies
Maintain inspection equipment and ensure work areas remain organized and compliant
Assist with process improvements and continuous quality initiatives across the maintenance operation
Requirements
Valid FAA Airframe & Powerplant (A&P) License strongly preferred
Minimum 5+ years of aircraft maintenance and/or quality inspection experience required PLUS 2+ years of supervisory experience.
Strong corporate aircraft maintenance experience required
Previous QA, QC, or Inspector experience strongly preferred
Experience performing return-to-service inspections and maintenance compliance reviews required
Strong knowledge of FAA regulations including FAR Part 43 and Part 145 required
Experience on corporate aircraft strongly preferred, specifically: Challenger 300, Global Express, Gulfstream GIV, Gulfstream G450, Cessna Citation X, Cessna Citation 560XL
Advanced hands-on experience with Gulfstream and Bombardier aircraft strongly preferred
Strong understanding of maintenance manuals, technical data, and regulatory documentation required
Experience using CMP and CAMP maintenance tracking systems preferred
High attention to detail and strong decision-making skills required
Strong communication, organization, and problem-solving skills required
Valid driver’s license with no major infractions required
No tools required — only a flashlight and mirror needed for inspections
Must be able to pass pre-employment screenings and comply with airport/security requirements
Miscellaneous
About Our Client
Our client is a highly respected leader in corporate aviation maintenance, specializing in premium business jet support, inspections, and return-to-service operations. Their team supports some of the most recognized aircraft platforms in private aviation and maintains exceptionally high standards for safety, compliance, and technical excellence.
This is an opportunity to join a stable, growth-focused operation where experienced technicians can build long-term careers while working on top-tier corporate aircraft in one of the busiest private aviation markets in the country.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
762365948588695
The Composite Technician is responsible for fabrication, rework and repair of metallic and nonmetallic bonded parts for operational aircraft.
Essential Duties and Responsibilities
Performs bonding of metallic or nonmetallic materials to fabricate parts for aircraft applications using products and processes are varied but generally not complex in scope. The level of work performed requires some skill and experience. Works under regular supervision applying standard procedures and solutions to meet work requirements. Priorities are determined by management.
Reads and interprets blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings.
Determines equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials.
Plans, lays out, fabricates and builds adhesive bonded assemblies of metallic and nonmetallic composite materials.
Fabricate composite and metal parts into subassemblies for the purpose of pre-fitting in preparation for bonding/curing in presses, ovens, and autoclaves.
Lays out, prefits, assemble and performs lay-up on a variety of metal to metal and composite bonded assemblies.
Fits core in panels where close tolerances are required for installation of details for completion of assembly.
Performs vacuum bagging for Autoclave cures up to 100 psi.
Lays out and marks dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates.
Selects tooling and materials compatible with the processing techniques identified in the work instructions.
Requirements
High School Diploma or GED
Four (4) years of composite experience
Miscellaneous
About Our Client
This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
153722678186499
Join the team as an A&P Mechanic in Wichita, KS, where you’ll contribute to world-class aircraft maintenance. In this role, you’ll play an essential part in inspecting, troubleshooting, and repairing Bombardier aircraft, ensuring they meet top safety and quality standards. If you are a motivated professional with a passion for aviation and technical precision, this is a prime opportunity to grow your skills and career with one of the most respected names in the industry.
Essential Duties and Responsibilities
Perform Scheduled and Unscheduled Maintenance: Conduct inspections, tests, and repairs on aircraft to ensure optimal functionality and safety.
Troubleshoot and Diagnose Mechanical Issues: Efficiently locate and correct any mechanical problems in accordance with company and FAA standards.
Documentation and Compliance: Accurately document all maintenance actions and ensure compliance with Bombardier and FAA regulations.
Collaborate with Team Members: Work closely with other mechanics, inspectors, and engineers to troubleshoot and resolve technical issues.
Utilize Technical Manuals and Schematics: Rely on detailed manuals and schematics to execute precise repairs and modifications.
Requirements
You have a valid and current FAA Airframe & Powerplant (A&P) license. Willing to accept only an Airframe for the right candidate.
You have a minimum of 8+ years’ experience.
You have a minimum of 5+ years' corporate aircraft experience
You have the ability to interpret and work with mechanical engineering drawings.
You have the ability to effectively communicate in English both written and verbal form on individual and / or aircraft status.
You own a basic set of hand tools with the ability to demonstrate inventory & control of tools.
You must obtain appropriate Ground Support Equipment Qualifications, as required.
You have the ability to work unscheduled overtime including nonscheduled workdays and holidays.
You have basic PC skills.
You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable).
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
163682733172143
As an Aircraft Painter, you will contribute to the preparation, application, and finishing of aircraft surfaces to meet customer specifications and quality standards. Your role involves ensuring all work complies with safety protocols, regulations, and customer expectations while delivering polished, professional results.
Essential Duties and Responsibilities
Adhere to Company General Work Requirements (Factory, Shop and/or Hangar positions).
Comply with environmental health, safety policies and procedures; participate in 5-S activities and perform all work in a safe and timely manner.
Perform surface preparation on aircraft and component parts.
Apply primer, topcoat and final spray
Polish painted surfaces for finished appearance.
Inspect, perform touch-up and polish painted surfaces for a finished appearance.
Install sealant and erosion tape.
Performs and documents all work performed per appropriate manuals and regulations as required.
Layout aircraft to customer specifications
Requirements
Minimum of 7 year of aircraft painting experience
Satisfactory results on Pulmonary Function evaluation in order to obtain respirator certification.
Formal vocational training or equivalent.
Customer service and aviation work experience.
Basic PC skills.
Basic knowledge pulling maintenance manuals and IPCs from computer.
Basic knowledge of regulations dealing with transportation of hazardous materials.
Ability to communicate in both written and verbal form on individual and/or aircraft status.
Ability to interpret and work with mechanical engineering drawings.
Miscellaneous
Ability to work in a fast-paced and dynamic environment Opportunity for growth and skill development in a leading aerospace company
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
169404477897965
Join the team as an A&P Mechanic in Wichita, KS, where you’ll contribute to world-class aircraft maintenance. In this role, you’ll play an essential part in inspecting, troubleshooting, and repairing Bombardier aircraft, ensuring they meet top safety and quality standards. If you are a motivated professional with a passion for aviation and technical precision, this is a prime opportunity to grow your skills and career with one of the most respected names in the industry.
Essential Duties and Responsibilities
Perform Scheduled and Unscheduled Maintenance: Conduct inspections, tests, and repairs on aircraft to ensure optimal functionality and safety.
Troubleshoot and Diagnose Mechanical Issues: Efficiently locate and correct any mechanical problems in accordance with company and FAA standards.
Documentation and Compliance: Accurately document all maintenance actions and ensure compliance with Bombardier and FAA regulations.
Collaborate with Team Members: Work closely with other mechanics, inspectors, and engineers to troubleshoot and resolve technical issues.
Utilize Technical Manuals and Schematics: Rely on detailed manuals and schematics to execute precise repairs and modifications.
Requirements
You have a valid and current FAA Airframe & Powerplant (A&P) license. Willing to accept only an Airframe for the right candidate.
You have a minimum of 5+ years’ corporate aircraft experience.
You have the ability to interpret and work with mechanical engineering drawings.
You have the ability to effectively communicate in English both written and verbal form on individual and / or aircraft status.
You own a basic set of hand tools with the ability to demonstrate inventory & control of tools.
You must obtain appropriate Ground Support Equipment Qualifications, as required.
You have the ability to work unscheduled overtime including nonscheduled workdays and holidays.
You have basic PC skills.
You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable).
Miscellaneous
About Our Client
Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence. The Wichita, KS, facility is dedicated to producing and maintaining some of the most advanced aircraft in the world, delivering unparalleled quality and service to their clients.
Constant Cash
Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates.
https://apaconstantcash.com
We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000
Thanks for taking the time to apply and we look forward to working with you soon.
Job ID
701019982772523