Jobs Available

71 - 80 of 227 Matches

A&P Mechanic - Direct

Southeast (Marathon, FL)
Posted on 9/4/2026

The A & P Aircraft Mechanic repairs, maintains, and services District aircraft in compliance with the directives and standards of the Federal Aviation Administration and policies and procedures as set forth by the District Board of Commissioners and administered by the Executive Director. The A & P Aircraft Mechanic will be exposed to both inside and outside environmental conditions, noise, vibration, close proximity to moving mechanical parts, working in high places, small confined spaces, exposure to chemicals, fumes, odors and or oils and may be required to wear a respirator and other protective equipment as required. The A & P Aircraft Mechanic will be expected to perform very heavy work (frequently exerting in excess of 50 lbs of force to lift, carry, push, pull, twist, reach, or otherwise move objects) below, above the waist and shoulders.

Essential Duties and Responsibilities

• Check and determine the need and extent of repair and maintenance to be made to District aircraft so that aircraft stays in proper working order. • Perform pre and post flight inspections and maintain District owned aircraft under the periodic inspection program specified by the FAA for charter aircraft in order to provide a reasonable assurance that aircraft are functioning properly. • Fuel aircraft and load with chemicals as required so that aircraft have enough fuel and chemicals for each mission. • Perform equipment calibration prior to missions to ensure proper amounts of chemicals are released from aircraft. • Perform inspections and repairs in order to submit any FAA required documents to the Director of Aircraft Maintenance. • Maintain and rebuild aircraft engines and airframe as needed with an objective of all aircraft being mission ready. • Assist in the design and fabrication or modification of special equipment such as liquid and dry application equipment resulting in fully functioning equipment to assist in the abatement of mosquito populations. • Prepare requisitions and work orders under the direction of the Director of Aircraft Maintenance for parts and materials needed to maintain District aircraft in a state of readiness. • Perform routine maintenance and repair to facilities in order to keep the building in good working order. • Operate forklifts and other ground support equipment as needed to help complete tasks. • Assist ground operations when needed with maintenance, repair, and operation of vehicles and spray equipment as necessary in order to have functioning ground equipment. • Reinforce aircraft operation sites when aircraft operations exceed the capacity of the Aircraft Support Technicians in the field. • Follow Federal and State laws and District policies regarding health and safety to ensure compliance.

Requirements

Knowledge: • Knowledge of FAA rules and regulations governing configuration, restrictions, and modification of aircraft used for aerial pesticide application • Knowledge of the principles and techniques of aircraft maintenance • Knowledge of general maintenance, repair, and servicing techniques Abilities & Skills: • Ability to operate machinery, vehicles, and material handling equipment • Ability to receive instructions and to perform tasks assigned in a safe and efficient manner Education, Training, & Experience: • Completed high school education or equivalent trade school education • Five years experience in aircraft maintenance • Must have an Airframe and Power plant License • Must be licensed in “Public Health Pest Control” from the Department of Agriculture and Consumer Services or able to obtain such certification within one year • Must hold a valid Florida CDL License or receive it within 1 year of hire date. • Must hold a valid forklift certificate in accordance with OSHA: 29 CFR 1910.178

Miscellaneous

The A & P Aircraft Mechanic will be exposed to both inside and outside environmental conditions, noise, vibration, close proximity to moving mechanical parts, working in high places, small confined spaces, exposure to chemicals, fumes, odors and or oils and may be required to wear a respirator and other protective equipment as required. The A & P Aircraft Mechanic will be expected to perform very heavy work (frequently exerting in excess of 50 lbs of force to lift, carry, push, pull, twist, reach, or otherwise move objects) below, above the waist and shoulders.

About Our Client

Our client is the official mosquito control provider for the Florida Keys which is located at the southern tip of the Florida penisula in Monroe County, FL.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

182278987149561

Featured job

Sheetmetal Technician

Southeast (Hialeah Gardens, FL)
Posted on 9/4/2026

Perform quality aircraft component maintenance and/or repairs within budgeted time in compliance with all applicable Code of Federal Regulations, Repair Station Procedures, customer requirements, and manufacturer's recommendations. Organize work plan in an efficient and resourceful manner.

Essential Duties and Responsibilities

Essential Duties and Responsibilities: Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation. Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness . Complete all tasks to the quality standards of Company, FAA and our customers' approved maintenance manual. Perform work within estimated or budgeted hours Read and use Maintenance Manuals, Illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, routine and non-routines and other related maintenance documents in order to troubleshoot and effectively complete work assignments. Ensures that Company and customer aircraft maintenance documents are accurate and properly annotated. Ensures documents are returned to the Technical Library and/or destroyed, as required, after jobs are complete. Use and operate safely all ground support equipment, (i.e., Main Lifts, Scissor Lifts, etc.) and possess Company operating certification. Promote a culture of safety my monitoring self and others to assure all duties are performed within the guidelines as specified by the Company Team Member Safety Manual. Responsible for the proper execution of parts tags attached to repairable, serviceable or condemned parts. Interface effectively with members of management, other departments and co-workers Keep own and adjacent work area clean Able to work any or all shifts

Requirements

Requirements: 4-6 years years of sheet metal experience on commercial aircraft Able to read schematics/blueprints of moderate complexity, engineering drawings and technical instructions. Have working knowledge of SRM (Repair Station Manual) references. Must have own tools. High School Diploma/GED. Must be able to read, write and speak English. Must be able to lift fifty (50) lbs. Subject to continual loud noises. Must be able to bend, stoop, kneel, and stand for prolonged periods of time, climb steps, ladders and/or service stands. Successfully complete a comprehensive background check, verification of credentials, and a urinary pre-employment test for drugs as per DOT regulations.

Miscellaneous

About Our Client

Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

554068028680535

Featured job

Avionics Technician

South Central (Ardmore, OK)
Posted on 9/4/2026

The primary duties of this position are to install, troubleshoot, inspect, test, adjust, repair, and/or modify avionics systems, sub-systems and equipment installed on aircraft, in accordance to applicable Federal Aviation Administration (FAA) regulations. Responsible to assist in the supervision of labor, provide technical knowledge and evaluate material requirements, upon request.

Essential Duties and Responsibilities

Interprets and installs avionic system in accordance with installation drawings, schematics, handbooks, and other technical documents with minimal or no supervision. Responsible for inspecting components of avionics equipment for defects and examines accuracy of assembly and installation. Troubleshoots to determine malfunctions on aircraft avionics components and electrical system components. Accountable for testing avionics equipment under simulated or actual operating conditions to determine performance and airworthiness of aircraft. Provides analysis of tests results to identify adjustments, repairs, or replacement of defective components. Assures that only tooling and equipment in current calibration is utilized for installation, repairs, or modifications of aircraft avionics/electronic system. May accompany flight crew to perform in-flight adjustments/tests and to determine/record required post-flight repair work. Inspects and tests aircraft communications components, navigation components, weather radar, auto pilot, compass systems, and accessories, certifying that all meet manufacturer’s specifications. Responsible for completing all reports, forms, and checklists as required in accordance with company, government, and Federal Aviation Administration (FAA) regulations. Complies with all safety requirements and uses all mandated safety equipment in accordance with company, government, and OSHA requirements. Assists coworkers and those in other departments to successfully perform job duties and functions when necessary.

Requirements

High school diploma or general education degree (GED). 3 years of Boeing 737 experience. For this position, a current Airframe and Power Plant (A&P) or Federal Communications Commission (FCC) license is preferred. Must have current driver’s license. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, installation drawings or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the garner public. Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, aera, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract an concrete variables. Word processing, spreadsheets, internet software, e-mail, database software, inventory software, order processing software.

Miscellaneous

Facial Hair – Beards and mustaches, if worn, will be neatly trimmed to an approximate ¼” maximum. Short, evenly trimmed sideburns are allowed. Tattoos – Visible tattoos are allowed on arms and legs if they are not discriminatory based on racial, sexual, religious, ethnic, or other characteristics or attributes of a sensitive nature. These include the prohibition of any tattoos commonly associated with gangs, extremists and/or supremacist organizations or discrimination. Tattoos, brandings or body marks on the head, neck, face, tongue, lips, and/or scalp are prohibited. Hand tattoos are limited to one single-band ring tattoo, on one finger, on one hand. Shoes – When working in safety and/or industrial flight line environment, shoes must follow OSHA guidelines.

About Our Client

For over 20 years, our client has been providing outstanding aviation services on a global basis to operators of large corporate and VIP aircraft.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

988549346662738

Featured job

A&P Mechanic III

Midwest (East Alton, IL)
Posted on 9/4/2026

Seeking experienced A&P Mechanics to perform aircraft maintenance, inspections, troubleshooting, repairs, and modifications in a maintenance, repair, and overhaul (MRO) environment. This position supports a variety of aircraft platforms and offers the opportunity to work alongside a highly skilled maintenance team while ensuring all work is completed in accordance with FAA regulations, manufacturer specifications, and company quality standards.

Essential Duties and Responsibilities

Perform scheduled and unscheduled maintenance on aircraft and aircraft systems. Troubleshoot and repair airframe, engine, electrical, hydraulic, pneumatic, and mechanical systems. Conduct inspections in accordance with FAA regulations and company procedures. Read and interpret maintenance manuals, wiring diagrams, engineering drawings, and technical data. Complete accurate maintenance records and required documentation. Remove, install, test, and adjust aircraft components and systems. Perform operational and functional checks following maintenance activities. Maintain a safe, clean, and organized work environment. Follow all company safety, quality, and regulatory requirements. Assist with aircraft modifications, repairs, and return-to-service activities as assigned.

Requirements

Minimum Qualifications FAA Airframe & Powerplant (A&P) License required. Minimum 3 years of hands-on aircraft maintenance experience OR 2 years of corporate/business aviation maintenance experience. Experience performing inspections, troubleshooting, repairs, and maintenance on aircraft systems. Ability to read and interpret maintenance manuals, engineering drawings, wiring diagrams, and technical data. Strong troubleshooting and diagnostic skills. Must have own tools required to perform assigned duties. Ability to work overtime, weekends, and flexible schedules as needed. Preferred Qualifications Previous MRO, service center, corporate aviation, military, or commercial aircraft maintenance experience. Experience with major inspections, modifications, and return-to-service activities. Familiarity with FAA regulations, maintenance record keeping, and quality standards. Experience working independently with minimal supervision.

Miscellaneous

About Our Client

Our client is a leading provider of aircraft maintenance, repair, and overhaul (MRO) services, supporting a wide range of business aviation and special mission aircraft. With a strong reputation for quality workmanship, technical expertise, and customer service, they deliver comprehensive maintenance, inspection, modification, and avionics solutions from state-of-the-art facilities across the United States. Committed to safety, reliability, and operational excellence, our client invests in both advanced technology and skilled aviation professionals to ensure every aircraft is maintained to the highest standards. Their team-oriented culture provides employees with opportunities for career growth, ongoing training, and exposure to diverse aircraft platforms within a fast-paced aviation environment.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

194384393290475

Featured job

A&P Mechanic IV

Midwest (East Alton, IL)
Posted on 9/4/2026

Seeking experienced A&P Mechanics to perform aircraft maintenance, inspections, troubleshooting, repairs, and modifications in a maintenance, repair, and overhaul (MRO) environment. This position supports a variety of aircraft platforms and offers the opportunity to work alongside a highly skilled maintenance team while ensuring all work is completed in accordance with FAA regulations, manufacturer specifications, and company quality standards.

Essential Duties and Responsibilities

Perform scheduled and unscheduled maintenance on aircraft and aircraft systems. Troubleshoot and repair airframe, engine, electrical, hydraulic, pneumatic, and mechanical systems. Conduct inspections in accordance with FAA regulations and company procedures. Read and interpret maintenance manuals, wiring diagrams, engineering drawings, and technical data. Complete accurate maintenance records and required documentation. Remove, install, test, and adjust aircraft components and systems. Perform operational and functional checks following maintenance activities. Maintain a safe, clean, and organized work environment. Follow all company safety, quality, and regulatory requirements. Assist with aircraft modifications, repairs, and return-to-service activities as assigned.

Requirements

Minimum Qualifications FAA Airframe & Powerplant (A&P) License required. Minimum 5 years of hands-on aircraft maintenance experience OR 3 years of corporate/business aviation maintenance experience. Experience performing inspections, troubleshooting, repairs, and maintenance on aircraft systems. Ability to read and interpret maintenance manuals, engineering drawings, wiring diagrams, and technical data. Strong troubleshooting and diagnostic skills. Must have own tools required to perform assigned duties. Ability to work overtime, weekends, and flexible schedules as needed. Preferred Qualifications Previous MRO, service center, corporate aviation, military, or commercial aircraft maintenance experience. Experience with major inspections, modifications, and return-to-service activities. Familiarity with FAA regulations, maintenance record keeping, and quality standards. Experience working independently with minimal supervision.

Miscellaneous

About Our Client

Our client is a leading provider of aircraft maintenance, repair, and overhaul (MRO) services, supporting a wide range of business aviation and special mission aircraft. With a strong reputation for quality workmanship, technical expertise, and customer service, they deliver comprehensive maintenance, inspection, modification, and avionics solutions from state-of-the-art facilities across the United States. Committed to safety, reliability, and operational excellence, our client invests in both advanced technology and skilled aviation professionals to ensure every aircraft is maintained to the highest standards. Their team-oriented culture provides employees with opportunities for career growth, ongoing training, and exposure to diverse aircraft platforms within a fast-paced aviation environment.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

193764171981917

Featured job

Sheetmetal Mechanic

Midwest (Milwaukee, WI)
Posted on 9/4/2026

This is an excellent opportunity to join a stable aviation operation with consistent work, long-term potential, and a strong team environment. We are seeking experienced Sheet Metal Mechanics for an opportunity in Milwaukee, Wisconsin, supporting heavy maintenance operations on Shorts 360 cargo aircraft. Candidates do not need previous Shorts 360 experience. We are looking for skilled aircraft structures professionals with strong sheet metal and heavy maintenance experience who can bring their expertise to the team and learn the platform. The ideal candidate will have at least two years of hands-on aircraft sheet metal or structural maintenance experience with a strong background in structural repairs, fabrication, modification, drilling, riveting, and component removal and installation in a hangar environment.

Essential Duties and Responsibilities

Perform aircraft structural and sheet metal maintenance, repairs, and modifications on Shorts 360 cargo aircraft Inspect aircraft structures and identify damage, corrosion, cracks, and other structural discrepancies Perform structural repairs in accordance with approved technical data, engineering drawings, and Structural Repair Manuals (SRMs) Fabricate, fit, install, and repair aircraft sheet metal components and structural assemblies Perform drilling, countersinking, riveting, reaming, cutting, forming, and other aircraft sheet metal tasks Remove and install aircraft panels, skins, structural components, and related hardware Perform repairs and modifications to aircraft skins, frames, stringers, bulkheads, and other structural components Measure, lay out, and fabricate parts using drawings, templates, and technical specifications Read and interpret blueprints, engineering drawings, maintenance manuals, SRMs, and other technical data Ensure all maintenance and repair work is properly documented in accordance with FAA regulations and company requirements Maintain a safe, clean, and organized work environment Collaborate with mechanics, leads, inspectors, and management to meet maintenance schedules and aircraft delivery requirements Follow all company safety procedures, FAA regulations, and quality standards

Requirements

Minimum 2+ years of aircraft sheet metal or structural maintenance experience required Strong aircraft structures and heavy maintenance experience required Previous Shorts 360 experience is a plus but is not required Aircraft-specific experience is not required; candidates with structural maintenance experience on other aircraft platforms are encouraged to apply Hands-on experience with drilling, riveting, countersinking, reaming, fabrication, and structural repairs Experience repairing and replacing aircraft skins, panels, frames, stringers, and other structural components Ability to read and interpret blueprints, engineering drawings, Structural Repair Manuals, and other technical data Ability to accurately measure, lay out, fabricate, fit, and install aircraft structural components Familiarity with aircraft structural repair tools, equipment, and techniques A&P License is a plus but not required Must have own basic tools required for the position Ability to work overtime, weekends, and flexible shifts as needed Must be able to pass required pre-employment screenings Strong attention to detail with a commitment to safety, quality, and FAA compliance

Miscellaneous

About Our Client

Our client is a well-established aviation maintenance provider specializing in heavy commercial aircraft maintenance, repair, and overhaul services. Their operation supports major commercial aircraft platforms and is known for delivering high-quality maintenance solutions with a strong focus on safety, compliance, and operational excellence. With a reputation for stability and long-term growth, they offer mechanics the opportunity to work on large-scale commercial projects while building a lasting career in aviation maintenance.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

944970263089651

Featured job

A&P Mechanic

Midwest (Milwaukee, WI)
Posted on 9/4/2026

This is an excellent opportunity to join a stable aviation operation with consistent work, long-term potential, and a strong team environment. . We are seeking experienced A&P Mechanics for an opportunity in Milwaukee, Wisconsin, supporting heavy maintenance operations on Shorts 360 cargo aircraft. Candidates do not need previous Shorts 360 experience. We are looking for skilled A&P Mechanics with a strong heavy aircraft maintenance background who can bring their experience to the team and learn the platform. The ideal candidate will have at least two years of hands-on aircraft maintenance experience, with a strong background performing inspections, repairs, troubleshooting, component replacements, and other heavy maintenance tasks in a hangar environment.

Essential Duties and Responsibilities

Perform scheduled and unscheduled maintenance, troubleshooting, repairs, and inspections on Shorts 360 cargo aircraft Complete heavy maintenance tasks including aircraft inspections, system removals and installations, component replacements, and repairs Troubleshoot and repair airframe, engine, hydraulic, electrical, landing gear, and other aircraft systems Read and interpret maintenance manuals, engineering drawings, wiring diagrams, and other technical data Perform aircraft inspections and identify discrepancies requiring repair or corrective action Ensure all maintenance and repair work is properly documented in accordance with FAA regulations and company requirements Maintain a safe, clean, and organized work environment Collaborate with mechanics, leads, inspectors, and management to meet maintenance schedules and aircraft delivery requirements Follow all company safety procedures, FAA regulations, and quality standards

Requirements

Valid FAA Airframe & Powerplant (A&P) License required Minimum 2+ years of aircraft maintenance experience required Heavy aircraft maintenance experience required Previous Shorts 360 experience is a plus but is not required Aircraft-specific experience is not required; candidates with heavy maintenance experience on other aircraft platforms are encouraged to apply Experience performing inspections, troubleshooting, repairs, component removals/installations, and other heavy maintenance tasks Ability to read and interpret aircraft maintenance manuals, technical data, wiring diagrams, and engineering documents Must have own basic tools required for the position Ability to work overtime, weekends, and flexible shifts as needed Must be able to pass required pre-employment screenings Strong attention to detail with a commitment to safety, quality, and FAA compliance

Miscellaneous

About Our Client

Our client is a well-established aviation maintenance provider specializing in heavy commercial aircraft maintenance, repair, and overhaul services. Their operation supports major commercial aircraft platforms and is known for delivering high-quality maintenance solutions with a strong focus on safety, compliance, and operational excellence. With a reputation for stability and long-term growth, they offer mechanics the opportunity to work on large-scale commercial projects while building a lasting career in aviation maintenance.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

720562037663311

Featured job

Avionics Technician

West (Everett, WA)
Posted on 9/4/2026

Performs routine repairs, checks and installations of all Avionics systems on Boeing VIP aircraft

Essential Duties and Responsibilities

Within budgeted or estimated time, repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance. Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents. Accurately document work performed as set forth maintenance programs on a daily basis using the standard format. Prepare routine reports and correspondence. Fabricate per drawings and standard practices wire bundles and assemblies to include marking of wires, properly securing wires into bundles, and termination of wires into a variety of contacts and connectors.

Requirements

3-5 years of Avionics Experience on Boeing Aircraft Boeing 737 and 767 experience is preferred Must have working knowledge of Avionics systems and their operation and the proven ability to troubleshoot basic problems. Must have broad, overall knowledge of other aircraft systems e.g. hydraulic, flight controls, etc. and major components. High school diploma or GED

Miscellaneous

About Our Client

Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

198070699796773

Featured job

A&P Mechanic

South Central (Ardmore, OK)
Posted on 9/4/2026

A&P Mechanic will perform skilled work to identify, remove, and install aircraft components and to perform servicing of engines and aircraft accessories to ensure airworthiness according to customer specifications and FAA standards.

Essential Duties and Responsibilities

Primary duties will be flight control Removals, balancing and reinstallation as well as panels and aerodynamic fairing removal and re installations as well as defueling. Perform skilled work to identify, remove, and install aircraft components Perform servicing of engines and aircraft accessories Remove and install aircraft engines Rig and adjust aircraft secondary systems

Requirements

Minimum of 3 years experience as an A&P Mechanic with experience on Dash-8 or King Air aircraft Must be fluent in English. A&P license required High School Diploma or Equivalent Bring your own tools, they must be etched and shadowed and shall be identified with a number unique to the owner.

Miscellaneous

Facial Hair – Beards and mustaches, if worn, will be neatly trimmed to an approximate ¼” maximum. Short, evenly trimmed sideburns are allowed. Tattoos – Visible tattoos are allowed on arms and legs if they are not discriminatory based on racial, sexual, religious, ethnic, or other characteristics or attributes of a sensitive nature. These include the prohibition of any tattoos commonly associated with gangs, extremists and/or supremacist organizations or discrimination. Tattoos, brandings or body marks on the head, neck, face, tongue, lips, and/or scalp are prohibited. Hand tattoos are limited to one single-band ring tattoo, on one finger, on one hand. Shoes – When working in safety and/or industrial flight line environment, shoes must follow OSHA guidelines.

About Our Client

For over 20 years, our client has been providing outstanding aviation services on a global basis to operators of large corporate and VIP aircraft.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

200539301999806

Featured job

Heavy Structures Mechanic

West (Everett, WA)
Posted on 9/4/2026

Our client is seeking to hire turn-key licensed master mechanics for a brand new project at their location in Everett, WA

Essential Duties and Responsibilities

Locate and mark dimensions, layout patterns, and templates, fabricate parts, repair or replace heavy structure aircraft components. Read and interpret manufacturer and airline maintenance manuals, service bulletins, engineering authorizations, structural repair manuals, drawings and other specifications to determine feasibility and method of repair, replacement or modification Provide accurate documentation on customer paperwork per FAA requirements. Communicate effectively with other maintenance personnel at all levels by keeping co-workers and leadership apprised of work progress and difficulties as they arise. Follow safety program including hazmat tool control and foreign object damage (FOD) Conduct operational tests. Help with general clean-up of work area. Maintain regular and prompt attendance Perform other duties as assigned.

Requirements

A&P License preferred Must be able to execute the most complex Structure Repairs by reviewing SRMs and engineering drawings. • Floor beams, seat tracks, 540 stringer repairs, 663 pressure deck, Cargo Bay repairs. • Skin repairs & skin replacements. • Able to identify flag notes in engineering drawings – interpret Advanced Drawing Change Notices (ADCN). • Mentor/ guide small crew of lower-level non-licensed mechanics and sign on their repairs

Miscellaneous

About Our Client

Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

690128088793940

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs