Jobs Available

191 - 200 of 206 Matches
Featured job

A&P Mechanic II

Southeast (Sanford, FL)
Posted on 7/29/2026

We are seeking experienced A&P Mechanics for a leading heavy commercial MRO facility in Sanford, Florida. This position supports scheduled and unscheduled maintenance, repairs, and inspections on narrow-body commercial aircraft in a fast-paced hangar environment. Candidates must have strong heavy maintenance experience and be comfortable working on large transport-category aircraft during C-checks, structural repairs, and return-to-service projects. This is an excellent opportunity to join a stable operation with consistent work, long-term potential, and a strong team environment.

Essential Duties and Responsibilities

Perform maintenance, troubleshooting, repair, and inspections on commercial aircraft in accordance with FAA regulations and company standards Complete heavy maintenance tasks including C-checks, structural repairs, system removals/installations, and component replacements Read and interpret maintenance manuals, engineering drawings, wiring diagrams, and technical data Conduct inspections of airframes, engines, landing gear, hydraulic systems, and related components Ensure all work is properly documented in compliance with FAA and customer requirements Maintain a safe, clean, and organized work environment Collaborate with team members, leads, inspectors, and management to meet production schedules and aircraft delivery deadlines Follow all safety procedures and quality standards throughout the maintenance process

Requirements

Valid FAA Airframe & Powerplant (A&P) License required Minimum 2+ years of heavy commercial aircraft maintenance experience required Strong recent experience in heavy commercial MRO environments required Experience specifically on Boeing 757, Boeing 737, and Airbus A319 / A320 / A321 strongly preferred Experience with heavy checks, overnight maintenance, and structural repair work preferred Ability to read and interpret technical manuals and engineering documents Must have own basic tools required for the position Ability to work overtime, weekends, and flexible shifts as needed Must be able to pass pre-employment screenings and comply with airport/security requirements Strong attention to detail and commitment to safety and quality

Miscellaneous

About Our Client

Our client is a well-established aviation maintenance provider specializing in heavy commercial aircraft maintenance, repair, and overhaul services. Their operation supports major commercial aircraft platforms and is known for delivering high-quality maintenance solutions with a strong focus on safety, compliance, and operational excellence. With a reputation for stability and long-term growth, they offer mechanics the opportunity to work on large-scale commercial projects while building a lasting career in aviation maintenance.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

184912449267326

Featured job

Aircraft Inspector

South Central (Little Rock, AR)
Posted on 7/29/2026

Perform in-process and final inspections of aircraft systems and components to determine the conformity of the aircraft to approved data and airworthiness. Perform installation inspections of components, structures wiring, and other aircraft associated items for conformity to engineering and other approved data. Perform good understanding of Production Organization Approval (POA) processes and how it correlates to daily activities.

Essential Duties and Responsibilities

Perform complete major inspection of aircraft, components, major assemblies, sub- assemblies, production tools or parts during manufacturing, modifications, installation, service, overhaul or flight to determine airworthiness, safety or conformance to approved data and Company standards and requirements. Apply technical knowledge in the fields of mechanics, hydraulics, electricity, sheet metal, rigging, instruments, test flights, etc. to determine and sign off safety, airworthiness, or conformance. Interpret and check prints, both hard copy and electronic, engineering change orders and governmental regulatory procedures and specifications. Use precision measuring guides, gauges and laboratory instruments. Familiar with FAR Part 145, 135, 91, 65 and 21. Prepare necessary aircraft related FAA, customer or company documents. Complete and maintain reports and records as required. Accurately enter electronic data related to aircraft production, completion and installation operations. Effectively collaborate with various management groups from the Business Units and Engineering. Work in a safe manner in accordance with OSHA and company safety procedures. Perform all other duties assigned Assist in development of procedures and written instructions related to quality issues.

Requirements

High school diploma or equivalent. Airframe certificate Minimum of 5 years’ experience in scheduled or unscheduled aircraft maintenance or equivalent. Minimum of 1 years’ experience with FAR 145 Repair Station and FAR 43 Maintenance. Minimum of 1 years’ experience with FWW/EASA/POA processes. Minimum of 1 delegation right (CVE, Form 1, Form 52, Form 53, NCR MRB, Repair Station or Powerplant License) Able to read and understand structural and avionic drawings, schematics, test procedures, etc. Good verbal and written communication skills to prepare detailed reports. Computer literacy Critical thinking, logic and analytical skills. Pass vision testing, minimum 20/20 corrected, and with no limitations in color perception. Must demonstrate competency in English (read, write, speak and understand the English language) Able to work in a high noise environment (jet engines, air tools, etc.) with or without reasonable accommodation

Miscellaneous

ADDITIONAL DESIRED QUALIFICATIONS: Associate degree in aerospace field Powerplant License FCC license 5S+ / LEAN principles ACE values WORKING CONDITIONS: Some travel may be required. Work various shifts. Overtime required. Outside work and work in non-climate-controlled areas are required. Involves exposure to chemicals and dust levels set by OSHA standards. Must be physically able to walk up and down steps, able to walk long distances, climb, stand, kneel and work in confined areas all with or without reasonable accommodation

About Our Client

Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

472938136948437

Featured job

Temp Production Operator Assistant-SGP

South Central (Tulsa, OK)
Posted on 7/29/2026

Applies basic, and some intermediate technical skills and knowledge to set up and operate the process equipment used to stretch, saw, grind and polish and otherwise complete the processing of acrylic billets into finished acrylic sheets of material for use in making transparencies for operational aircraft applications.Essential

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned.Performs tasks and operate machines and equipment that are required to process acrylic material used to make transparencies into parts and assemblies such as wing tip lenses, flight deck, passenger cabin and helicopter windows used on operational aircraft.Reads blueprint, work instructions and planning documents to understand the specifications that are needed to produce quality material. Determine how such items as oven temperature, heating time, dimensions, tolerances, material cutting, polish machine speeds, holding fixtures, and other operations affect the outcome of the production process.Prepares acrylic billet material for the pre-stretch heating cycle. Places prepared billets into the oven using various types of material handling equipment and set the temperature controls. Lifts and positions heated material into the holding fixture, sets the machine controls and completes the stretching process.Operates band saw to cut material to size indicated on the planning documents. Places material to be cut onto the saw table surface using various types of material handling equipment. Starts machine and activate controls to complete the sawing process.Places stretched acrylic material on the grinding/polishing table using various types of material handling equipment. Activates vacuum hold down equipment and ensure material is held immovable to the grind/polish machine table. Adjust machine controls to bring polishing wheel into contact with the material. Turns valves to regulate flow of water into polishing head and starts machine.Examines finished material to determine conformance of finish and deformities specifications. Mark or otherwise indicate non-conforming areas of the finished acrylic sheet.Replaces worn grinding and surface conditioning discs and maintains machine in operating condition.Ancillary Job Functions and Responsibilities:Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.

Requirements

Skills and Work Requirements : Any kind of mechanical inclination that allows them to read a tape measure and cut parts. Manufacturing and machine use would be helpful for stretch and polish. Able to cross train throughout the area.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

183526670890620

Featured job

Temp Bonder Assistant

South Central (Tulsa, OK)
Posted on 7/29/2026

Applies knowledge of basic production procedures to assist other stakeholders and learn the processes to fabricate, rework, and repair metallic and nonmetallic bonded parts and assemblies for operational aircraft applications.

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to problems or work situations of a routine or repetitive nature. May perform a variety of routine duties related to any work operation in the manufacturing or repair of company and customer products as required. Assists in performing tasks associated with determining the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials. Assists in planning, fabricating and building adhesive bonded assemblies of metallic and nonmetallic composite materials. Fabricates composite and metal parts into subassemblies for the purpose of prefitting in preparation for bonding/curing in presses, ovens, and autoclaves. Assists in lay out, prefit, and assembly and lay-up of a variety of metal to metal and composite bonded assemblies. May lay out and mark dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates. Performs vacuum bagging for Autoclave cures up to 100 psi. Learns to read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Selects tooling and materials compatible with the processing techniques identified in the work instructions. Ancillary Functions and Responsibilities: Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.

Requirements

High School Diploma, GED or equivalent. Previous work experience in a manufacturing environment preferred, but not required. Must be able to use small hand tools and machinery.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

486685353366823

Temp Material Handler II

South Central (Tulsa, OK)
Posted on 7/29/2026

Applies moderate to advanced knowledge of material handler processes and skills.

Essential Duties and Responsibilities

Kit production and service orders from warehouse inventory. Perform cycle counts and inventory adjustments, complete material put away and issue, pick up and deliver materials from production storage areas, provide customer service for stakeholders with warehouse or shipping needs, bag and tag parts, load and unload trucks, assemble and pack/unpack containers for shipping/receiving.

Requirements

No formal education required. One (1) to two (2) or more years' work experience in a manufacturing environment. Must be able to use / operate small hand tools and machinery.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

532092907837126

Featured job

Sheetmetal Mechanic III 10+ years

Southeast (PENSACOLA, FL)
Posted on 7/29/2026

A Sheetmetal Mechanic III is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.

Essential Duties and Responsibilities

Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner. Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall. Perform the duties of and provide the necessary training for lower skill levels. Maintain and store tools in a serviceable condition. Adhere to safe maintenance practices and keep a clean work area. Maintain and supply personal records of work performed on OJT forms for the Training Department. Successfully complete any courses deemed necessary by the Training Department. Perform any work that may be assigned by his or her supervisor.

Requirements

11 - 20 years’ experience of heavy structures on commercial aircraft. Passenger to Cargo conversions is a plus Minimum Required Tools (Etched before Arrival). Operating knowledge of shop equipment to include, drill presses, shears, brakes, and band saws. Capable of performing structural repairs on floor beams, fuselage skin repairs, to include stringers, doublers, and triplers. Capable of performing floor beam, and frame installations / repairs. Capable of performing basic repairs, blend outs, and reinforcing repairs. Corrosion removal, damage evaluation, and finish restoration. Ability to read and interpret SRM damage limits, and repairs. Working knowledge of IPCs. Ability to read, interpret, plan and work from complex SRM’s, Blueprints, Service Bulletins, ADs, EAs, and EO’s. Working knowledge of cold working, roto peening, and freeze plug installations a plus.

Miscellaneous

Candidates must report on first day with 2 forms of acceptable identification to verify employment eligibility. Applicants should plan on one week of orientation/training upon arrival APA offers on site representation Food trucks available daily onsite.

About Our Client

Our Client is located in Pensacola, FL, at the Pensacola International Airport. They are a renowned provider of aircraft maintenance and modification (AMM) services for commercial airlines and air freight operators. They meet their customers' requirements by providing a full spectrum of high-quality, reliable, and timely AMM and engineering solutions. Our client has the know-how and experience to comprehensively manage complex projects, ensuring the customers' aircraft operate safely and efficiently.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

541551357300769

Temp Acrylic Fabricator Assistant

South Central (Tulsa, OK)
Posted on 7/29/2026

Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned. Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions. Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications. Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions. Installs rivets, bolts, screws and clips and prepares and applies adhesives. Inspects assemblies and installation for conformance to specifications. Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses. Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.

Requirements

High School Diploma or GED Must be able to use small hand tools and machinery Previous manufacturing experience preferred.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

554674163127172

Featured job

Temp Production Operator Assistant-SGP

South Central (Tulsa, OK)
Posted on 7/29/2026

Applies basic, and some intermediate technical skills and knowledge to set up and operate the process equipment used to stretch, saw, grind and polish and otherwise complete the processing of acrylic billets into finished acrylic sheets of material for use in making transparencies for operational aircraft applications.Essential

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned.Performs tasks and operate machines and equipment that are required to process acrylic material used to make transparencies into parts and assemblies such as wing tip lenses, flight deck, passenger cabin and helicopter windows used on operational aircraft.Reads blueprint, work instructions and planning documents to understand the specifications that are needed to produce quality material. Determine how such items as oven temperature, heating time, dimensions, tolerances, material cutting, polish machine speeds, holding fixtures, and other operations affect the outcome of the production process.Prepares acrylic billet material for the pre-stretch heating cycle. Places prepared billets into the oven using various types of material handling equipment and set the temperature controls. Lifts and positions heated material into the holding fixture, sets the machine controls and completes the stretching process.Operates band saw to cut material to size indicated on the planning documents. Places material to be cut onto the saw table surface using various types of material handling equipment. Starts machine and activate controls to complete the sawing process.Places stretched acrylic material on the grinding/polishing table using various types of material handling equipment. Activates vacuum hold down equipment and ensure material is held immovable to the grind/polish machine table. Adjust machine controls to bring polishing wheel into contact with the material. Turns valves to regulate flow of water into polishing head and starts machine.Examines finished material to determine conformance of finish and deformities specifications. Mark or otherwise indicate non-conforming areas of the finished acrylic sheet.Replaces worn grinding and surface conditioning discs and maintains machine in operating condition.Ancillary Job Functions and Responsibilities:Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.

Requirements

Skills and Work Requirements : Any kind of mechanical inclination that allows them to read a tape measure and cut parts. Manufacturing and machine use would be helpful for stretch and polish. Able to cross train throughout the area.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

170374074428311

Temp Painter Assistant Repair

South Central (Tulsa, OK)
Posted on 7/29/2026

Applies a mastery of technical skills and knowledge and a detailed knowledge of industry standards and government regulations related to applying and ensuring quality of final paint application on original equipment manufactured parts, components and complete subsystems for operational aircraft applications.

Essential Duties and Responsibilities

Performs assembly of original equipment manufacturing of parts, components and subsystems for aircraft applications using products and processes are varied but generally not complex in scope to apply primer, topcoat paint, and any spray-applied coatings to aircraft parts consistent with government, customer and company standards. The level of work performed requires some skill and experience. Priorities are determined by management. Reads and interprets specifications and documents to define the scope of work on work orders. Cleans grease and dirt from product. Removes rust from metal with acid, wire brush, or steel wool. Applies masking tape over parts and areas that are not to be coated. Fills cavities and dents with putty to attain smooth surface. Computes mix ratios in order to mix paint materials. Selects and mixes coating liquid to produce desired color. Pours coating liquid into spray container and connects gun to air hose. Turns sprayer valves and nozzle to regulate width and pressure of spray. Selects the appropriate personal protective equipment for the operation to be performed. When using a respirator ensures the respirator is working properly and is properly worn. Applies spray onto work surface to apply prime or finish using protective or decorative material such as paint, enamel, glaze, gel-coat, or lacquer. Coats areas inaccessible to hand sprayer with brush. Heats and sprays wax onto products after they are tested. Cleans spraying equipment and brushes with solvent. Ensures compliance with environment regulations and maintains records in accordance with these environment regulations.

Requirements

7-10 Years (Aircraft Painting Experience) Will take a mixture of Aircraft experience and Auto Experience

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

167728630379785

Featured job

Avionics Technician

West (Tucson, AZ)
Posted on 7/29/2026

The Avionics Technician troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required.

Essential Duties and Responsibilities

Adhere to General Work Requirements (Factory, Shop and / or Hangar positions) Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner Operate ground support equipment as required Assist with mechanical / electrical removals and installations May assist with maintenance at off-site locations Perform other duties as assigned

Requirements

Minimum of 3 years of work experience or substantiated equivalent experience. FAA Airframe and Powerplant (A&P) or Airframe (A) License is required. MRO / Heavy Maintenance -AND- CRJ airframe experience preferred. Corporate jet aircraft or commercial aircraft experience preferred. If former military, those with military aircraft maintenance experience such as Depot/Isochronal/Phase inspections is a plus. GROL (General Radiotelephone Operator License) or AET (Aircraft Electronics Technician) Certification is a plus. Certification from Avionics, Electric A/C Technical school or equivalent military training is preferred. Must possess their own tools. Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing. Must be comfortable with 12-hour shift work, which includes days / nights and weekends.

Miscellaneous

About Our Client

For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors. Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

668889237847492

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs