Jobs Available

181 - 190 of 206 Matches
Featured job

Sheetmetal Mechanic II (5-10 years)

Southeast (PENSACOLA, FL)
Posted on 7/29/2026

A Sheetmetal Mechanic II is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.

Essential Duties and Responsibilities

Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner. Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall. Perform the duties of and provide the necessary training for lower skill levels. Maintain and store tools in a serviceable condition. Adhere to safe maintenance practices and keep a clean work area. Maintain and supply personal records of work performed on OJT forms for the Training Department. Successfully complete any courses deemed necessary by the Training Department. Perform any work that may be assigned by his or her supervisor.

Requirements

5 - 10 years’ experience of heavy structures on commercial aircraft. Passenger to Cargo conversions is a plus Minimum Required Tools (Etched before Arrival). Operating knowledge of shop equipment to include, drill presses, shears, brakes, and band saws. Capable of performing structural repairs on floor beams, fuselage skin repairs, to include stringers, doublers, and triplers. Capable of performing floor beam, and frame installations / repairs. Capable of performing basic repairs, blend outs, and reinforcing repairs. Corrosion removal, damage evaluation, and finish restoration. Ability to read and interpret SRM damage limits, and repairs. Working knowledge of IPCs. Ability to read, interpret, plan and work from complex SRM’s, Blueprints, Service Bulletins, ADs, EAs, and EO’s. Working knowledge of cold working, roto peening, and freeze plug installations a plus.

Miscellaneous

Candidates must report on first day with 2 forms of acceptable identification to verify employment eligibility. Applicants should plan on one week of orientation/training upon arrival APA offers on site representation Food trucks available daily onsite.

About Our Client

Our Client is located in Pensacola, FL, at the Pensacola International Airport. They are a renowned provider of aircraft maintenance and modification (AMM) services for commercial airlines and air freight operators. They meet their customers' requirements by providing a full spectrum of high-quality, reliable, and timely AMM and engineering solutions. Our client has the know-how and experience to comprehensively manage complex projects, ensuring the customers' aircraft operate safely and efficiently.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

151255927293968

Featured job

Temp Bonder Assistant

South Central (Tulsa, OK)
Posted on 7/29/2026

Applies knowledge of basic production procedures to assist other stakeholders and learn the processes to fabricate, rework, and repair metallic and nonmetallic bonded parts and assemblies for operational aircraft applications.

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to problems or work situations of a routine or repetitive nature. May perform a variety of routine duties related to any work operation in the manufacturing or repair of company and customer products as required. Assists in performing tasks associated with determining the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials. Assists in planning, fabricating and building adhesive bonded assemblies of metallic and nonmetallic composite materials. Fabricates composite and metal parts into subassemblies for the purpose of prefitting in preparation for bonding/curing in presses, ovens, and autoclaves. Assists in lay out, prefit, and assembly and lay-up of a variety of metal to metal and composite bonded assemblies. May lay out and mark dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates. Performs vacuum bagging for Autoclave cures up to 100 psi. Learns to read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Selects tooling and materials compatible with the processing techniques identified in the work instructions. Ancillary Functions and Responsibilities: Performs other duties as required. These duties may include assignments in job classifications other than the primary assignment.

Requirements

High School Diploma, GED or equivalent. Previous work experience in a manufacturing environment preferred, but not required. Must be able to use small hand tools and machinery.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

289859687689785

Featured job

A&P Mechanic

Southeast (Lake City, FL)
Posted on 7/29/2026

The A&P Mechanic is responsible to perform aircraft maintenance and/or repairs within estimated time in accordance with applicable "Client Airframe Services", FAA, and customer standards of quality. This includes organizing his/her work plan in an efficient and resourceful manner. The A&P Mechanic is responsible to work in a safe manner, eliminating waste, and delivering a quality product on time.

Essential Duties and Responsibilities

Perform such typical maintenance operations as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting, rigging, and safety wiring to include powerplant, and flight control removal/installation. Troubleshoot, repair, clean, service, inspect, modify, replace, and/or overhaul aircraft and aircraft systems using approved data to ensure airworthiness. Follow all applicable specifications to accomplish a specific task. Maintain a clean and safe working environment. Perform work within estimated hours. Follow all safety procedures and specifications. Execute all required paperwork in connection with assigned normal duties. Use and operate ground support equipment, as applicable and if qualified, in a safe manner. Work with little or no supervision and accomplish assignments with little or no rework. Assist other employees in the performance of their job assignments through coaching, counseling, and guidance. Interface effectively with members of management, other departments, and co-workers.

Requirements

TWO (2) years aircraft maintenance experience on heavy transport category aircraft. High School diploma or equivalent. FAA Airframe and Powerplant certificate. Must provide own tools as indicated on company tool list. Language (read, write, speak, and understand English) Respirator Fit Testing and Audiogram

Miscellaneous

About Our Client

Our client utilizes multiple locations across the United States to offer comprehensive single-source solutions for aircraft engineering, interiors and maintenance. They support aircraft carriers around the world through a broad array of aircraft maintenance, Repair and Overhaul, as well as cabin interiors products.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

210852101761554

Featured job

Interior Mechanic (Airframe Upper)

West (Everett, WA)
Posted on 7/29/2026

Seeking Interior Mechanics in Everett, WA

Essential Duties and Responsibilities

Work with a team to install, repair and modify interiors for passenger services.

Requirements

Interiors background working on Boeing 737, 757 and 767. Airbus background a plus. Experience: Remove/reinstall interior linings, cargo bay liners, floor panels. Experience: Remove/reinstall lavatories, galleys, seats, windscreens Experience: Remove/reinstall/adjust doors. Use of basic hand tools (i.e., sockets, wrenches, ratchets, screw drivers, pliers, etc.)

Miscellaneous

About Our Client

Headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

335928177074949

Featured job

Temp Bonder Assistant Repair

South Central (Tulsa, OK)
Posted on 7/29/2026

4 years experience in aircraft repair bonding in an aerospace environment 1st Shift Competitive pay DOE Applies advanced technical skills and knowledge to fabricate, rework and repair metallic and nonmetallic bonded parts and assemblies for operational aircraft applications. Performs any of the detailed work operations required to be completed in this area of specialization.

Essential Duties and Responsibilities

Essential Functions and Key Responsibilities: Performs bonding of metallic and nonmetallic materials to fabricate parts, components and assemblies for aircraft applications using products and processes that are varied and moderately complex to complex in scope. The level of work requires experience and sound judgment. Read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determine equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials. Plans, lays out, fabricates and builds adhesive bonded assemblies of metallic and nonmetallic composite materials. Fabricate composite and metal parts into subassemblies for the purpose of prefitting in preparation for bonding/curing in presses, ovens, and autoclaves. Lays out, prefits, assembles and performs lay-up on a variety of metal to metal and composite bonded assemblies. Fits core in panels where close tolerances are required for installation of details for completion of assembly. Performs vacuum bagging for Autoclave cures up to 100 psi. Lays out and marks dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates. Selects tooling and materials compatible with the processing techniques identified in the work instructions. Performs rework or repair on any metallic or nonmetallic part presented for rework or repair.

Requirements

4 years experience in Aircraft Repair Bonding in an aerospace environment Special Skills, Licenses or Job Requirements: Demonstrate competency in applying the following in performing normal job duties. • Reading and interpreting work instructions, properly documenting work performed on such documents as process planning, adhesive log sheets, Material Review Board documents, Engineering Work Orders, Change Notices, Engineering Process Specifications, technical manuals and like documentation. • Use close tolerance measuring tools i.e. scales, micrometers, calipers, depth gages and like tools. Special Training and Behavioral Competencies: • Safety training as required by OSHA. • Intermediate blueprint reading. 

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

208131801652649

Featured job

Temp Repair Bonder Assistant

South Central (Tulsa, OK)
Posted on 7/29/2026

4 years' experience in aircraft repair bonding in an aerospace environment 2nd Shift / Will have to train on 1st shift for at least 30 days Competitive pay DOE Applies advanced technical skills and knowledge to fabricate, rework and repair metallic and nonmetallic bonded parts and assemblies for operational aircraft applications. Performs any of the detailed work operations required to be completed in this area of specialization.

Essential Duties and Responsibilities

Essential Functions and Key Responsibilities: Performs bonding of metallic and nonmetallic materials to fabricate parts, components and assemblies for aircraft applications using products and processes that are varied and moderately complex to complex in scope. The level of work requires experience and sound judgment. Read and interpret blueprints, drawings, manuals, specifications sketches, job orders, planning documents and engineering drawings. Determine equipment requirements and the method and sequences of operation to be followed in fabrication of parts using materials such as graphite, fiberglass, plastic, boron, flock, mat, epoxy resins, rubber and like materials. Plans, lays out, fabricates and builds adhesive bonded assemblies of metallic and nonmetallic composite materials. Fabricate composite and metal parts into subassemblies for the purpose of prefitting in preparation for bonding/curing in presses, ovens, and autoclaves. Lays out, prefits, assembles and performs lay-up on a variety of metal to metal and composite bonded assemblies. Fits core in panels where close tolerances are required for installation of details for completion of assembly. Performs vacuum bagging for Autoclave cures up to 100 psi. Lays out and marks dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates. Selects tooling and materials compatible with the processing techniques identified in the work instructions. Performs rework or repair on any metallic or nonmetallic part presented for rework or repair.

Requirements

4 years experience in Aircraft Repair Bonding in an aerospace environment Special Skills, Licenses or Job Requirements: Demonstrate competency in applying the following in performing normal job duties. • Reading and interpreting work instructions, properly documenting work performed on such documents as process planning, adhesive log sheets, Material Review Board documents, Engineering Work Orders, Change Notices, Engineering Process Specifications, technical manuals and like documentation. • Use close tolerance measuring tools i.e. scales, micrometers, calipers, depth gages and like tools. Special Training and Behavioral Competencies: • Safety training as required by OSHA. • Intermediate blueprint reading. 

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

198670338480171

Featured job

A&P Mechanic Lead

West (Goodyear, AZ)
Posted on 7/29/2026

The A&P Mechanic Lead will perform such typical maintenance operations as the removal and replacement of aircraft and powerplant components, troubleshoot, repair, clean, service, inspect, modify, replace, and/or overhaul aircraft and aircraft systems using approved data to ensure airworthiness.

Essential Duties and Responsibilities

Perform all work assigned in accordance with approved FAA data. Ensure complete and proper documentation of work performed. Ensure that all maintenance performed is in an air worthy condition. Maintain the premises and the repair station in a clean and organized manner. Perform additional duties as requested by supervisor or other management personnel. This is a safety sensitive position and is subject to submit to pre-employment and periodic DOT regulations for drug and alcohol testing.

Requirements

10+ Years Experience. Large commercial aircraft experience preferred but corporate, general or military aircraft will be considered. Must have Airframe & Power Plant (A&P) License Must have own tools High School Diploma or GED Physical Requirements: Bend, squat, sit, stand, walk, crawl, work in tight spaces and handle objects. Occasionally required to push/pull, stack, reach above shoulder level or carry light-weight materials.

Miscellaneous

About Our Client

Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

196695424046802

Featured job

Sheetmetal Mechanic I (1-5 YEARS)

Southeast (PENSACOLA, FL)
Posted on 7/29/2026

A Sheetmetal Mechanic I is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, and with minimal supervision.

Essential Duties and Responsibilities

Remove and replace various aircraft components with the use of special tooling and ground support equipment following oral and written instructions such as supervisor’s directives and manuals to complete all routine and non-routine assignments in a timely manner. Ability to layout work using bend radius, set back and bend allowance charts, utilization of shop math, install and/or splice spars, landing gear, trunion changes, pressure bulkhead repairs and keal beam repairs/ removal and reinstall. Perform the duties of and provide the necessary training for lower skill levels. Maintain and store tools in a serviceable condition. Adhere to safe maintenance practices and keep a clean work area. Maintain and supply personal records of work performed on OJT forms for the Training Department. Successfully complete any courses deemed necessary by the Training Department. Perform any work that may be assigned by his or her supervisor.

Requirements

1-5 years’ experience of heavy structures on commercial aircraft. Passenger to Cargo conversions is a plus Minimum Required Tools (Etched before Arrival). Operating knowledge of shop equipment to include, drill presses, shears, brakes, and band saws. Capable of performing structural repairs on floor beams, fuselage skin repairs, to include stringers, doublers, and triplers. Capable of performing floor beam, and frame installations / repairs. Capable of performing basic repairs, blend outs, and reinforcing repairs. Corrosion removal, damage evaluation, and finish restoration. Ability to read and interpret SRM damage limits, and repairs. Working knowledge of IPCs. Ability to read, interpret, plan and work from complex SRM’s, Blueprints, Service Bulletins, ADs, EAs, and EO’s. Working knowledge of cold working, roto peening, and freeze plug installations a plus.

Miscellaneous

Candidates must report on first day with 2 forms of acceptable identification to verify employment eligibility. Applicants should plan on one week of orientation/training upon arrival APA offers on site representation Food trucks available daily onsite.

About Our Client

Our Client is located at Brookley Aeroplex in Mobile, Alabama, and Pensacola, FL, at the Pensacola International Airport. They are a renowned provider of aircraft maintenance and modification (AMM) services for commercial airlines and air freight operators. They meet their customers' requirements by providing a full spectrum of high-quality, reliable, and timely AMM and engineering solutions. Our client has the know-how and experience to comprehensively manage complex projects, ensuring the customers' aircraft operate safely and efficiently.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

191183255546768

Featured job

A&P Mechanic

South Central (Addison, TX)
Posted on 7/29/2026

Our client is seeking experienced A&P Mechanics to support maintenance operations on corporate aircraft. This position is ideal for technicians who are hands-on, detail-oriented, and comfortable working in a fast-paced maintenance environment. Experience on Falcon 2000 aircraft is highly required.

Essential Duties and Responsibilities

Perform scheduled and unscheduled maintenance in accordance with FAA regulations Conduct inspections, repairs, and modifications on airframe and powerplant systems Troubleshoot mechanical discrepancies and perform corrective actions Read and interpret maintenance manuals, wiring diagrams, and technical documentation Complete accurate documentation of all work performed Ensure compliance with FAA regulations and company quality standards Work collaboratively with team members to meet production goals and deadlines

Requirements

FAA Airframe & Powerplant (A&P) License required Minimum 3+ years of experience on turbine aircraft Falcon 2000 experience required Strong troubleshooting and diagnostic ability Ability to read and interpret technical manuals and schematics Must have own tools Ability to work overtime and flexible shifts as needed

Miscellaneous

Preferred Experience Background in a Part 145 repair station or similar environment Experience working in a production-driven maintenance setting Strong reliability and work ethic

About Our Client

Our client is a well-established aviation maintenance organization supporting corporate and turbine aircraft operations. They are known for maintaining high standards of safety, quality, and reliability while operating in a fast-paced, team-oriented environment. Their commitment to operational excellence and technician support makes them a strong partner for experienced aviation professionals.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

188425737865485

Temp Laboratory Test Tech Associate

South Central (Tulsa, OK)
Posted on 7/29/2026

Applies basic and some advanced technical skills and knowledge in the performance of laboratory tests to determine chemical and physical characteristics or composition of materials for such purposes as quality control, process control or product development.

Essential Duties and Responsibilities

Performs physical, chemical and mechanical tests that are varied, but generally not complex, on products and processes requiring some skill and experience. Works under regular supervision applying standard procedures and solutions to meet work requirements. Priorities are determined by management. Sets up, adjusts and operates laboratory equipment and instruments to conduct physical, chemical and mechanical tests for experimental, production and vendor applications. Selects the appropriate personal protective equipment for the operation to be performed. When using a respirator ensures the respirator is working properly and is properly worn. Performs tests on various adhesives and prepregs to include gel, flow and volatility and resin control. Tests materials for compressive and tensile strength. Prepares chemical solutions according to standard formulas. Adds chemicals or raw materials to process solutions or product batches to correct or establish formulation required to meet specifications. Tests solutions used in processes such as anodizing, waterproofing, cleaning, bleaching, and pickling for chemical concentration, specific gravity, acidity or other characteristics using distillation, filtration, titration and extraction and pH meters. Tests samples of manufactured products to verify conformity to specifications. Records test results on standardized forms and write test reports describing procedures used. Prepares graphs and charts. Cleans and sterilizes laboratory equipment. Calibrates laboratory instruments.

Requirements

Associate level degree in laboratory testing or equivalent practical experience and two (2) to four (4) years laboratory experience.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

446227803100076

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs