Jobs Available

111 - 120 of 169 Matches
Featured job

Aircraft Mechanic L3

Southeast (Miami, FL)
Posted on 2/2/2026

Aircraft Mechanic III is responsible for performing routine and non-routine maintenance on commercial aircraft.

Essential Duties and Responsibilities

Perform preventive maintenance, repairs, part replacement and modifications for aircraft Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data. Troubleshoot problems, make repairs, and prepare areas for complete inspections. Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead. Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work. Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data. Ensure that the issued Task Card is properly scanned together with the Technician’s information before beginning the assigned task(s). Adhere to standard procedures and policies. Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number. Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times. Report any tool issues to stores and ensure the correct tag is attached and properly completed. Take part in any required training including GMM and safety. Proven ability to work alone and in a team environment. Able to perform intermediate/heavy maintenance tasks with little supervision. Perform flight control and engine throttle rigging. Able to use FAA approved data (i.e. IPC, M/M, OHM, SRM) proficiently.

Requirements

Minimum 5 years aircraft technician experience. 737/ MD80 Experience Required. A320 experience, preferred. Must Have Own Tools Must be able to read, write and speak the English language.

Miscellaneous

Candidates must report on the first day with 2 forms of acceptable identification (same used for new hire paperwork) to identify employment eligibility. Written and practical test will be given on day one.

About Our Client

Our Client provides turn-key aircraft maintenance, repair and overhaul (MRO) services for a wide array of commercial and military aircraft. As an independent FAA EASA approved repair station, our client’s services include scheduled and non-scheduled passenger airlines, cargo operators and leasing company’s maintenance.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

687398615460573

Featured job

Aircraft Mechanic (Unlicensed) - SURGE

Midwest (Kansas City, MO)
Posted on 2/2/2026

Seeking licensed A&P Mechanic with experience on heavy commercial aircraft in Kansas City, MO

Essential Duties and Responsibilities

General Has intermediate knowledge of all areas of the aircraft and assigned work area. Repair, modify, replace or otherwise perform routine aircraft maintenance work in specialized area of aircraft. Develop repair schemes utilizing SRM or Engineering data Communicate effectively with other maintenance personnel at all levels by keeping co-workers and leadership apprised of work progress and difficulties as they arise. Complete job assignments in a timely manner. Complete on-the-job-training (OJT) forms and required reading. Read and interpret manufacturer and airline maintenance manuals, service bulletins, drawings and other specifications to determine feasibility and method of repair, replacement or modification. Conduct operational tests. Help with general clean-up of work area. Responsible for accurately clocking to jobs. Regular and prompt attendance. Effective and appropriate conduct with co-workers. Perform other duties as assigned. Flight Controls Remove and Install flight control surfaces and components Perform weight and balance including calculation of flight control surfaces Perform rigging and operational test of all flight control surfaces including autopilot Troubleshoot flight control systems Utilize OEM and Engineering drawings to modify structures and flight controls Repair, replace, and rebuild aircraft structures Systems: Remove and replace landing gear, engines and air-conditioning systems Utilize OEM and Engineering drawings to modify parts Rig landing and operational test gear systems and engine systems Trouble shoot landing gear

Requirements

High School Diploma or equivalent. Airframe and Powerplant License referred Previous Commercial MRO experience – preferred minimum three years of experience Engine Remove and Reinstallation /Troubleshooting Pneumatics Troubleshooting Gear Remove and Reinstallation /Troubleshooting Rigging Ops Checks Remove and Reinstallation FC Experience on 737-9, 737-8 and A220

Miscellaneous

ENVIRONMENT: • The noise level in this work environment is usually moderate to high. • May occasionally work near moving mechanical parts in high, precarious places and may be exposed to fumes or airborne particles. • This position requires use of a respirator. PHYSICAL EFFORT AND DEXTERITY: • While performing the duties of this job, the employee will be required to sit; use their hands and arms; and talk • or hear; and focus on objects close. • The employee will also be required to stand; walk; and stoop, kneel, crouch, or crawl. The employee may be required to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. • Ability to handle and climb ladders and aircraft stairs.

About Our Client

This client is headquartered in Everett, Washington, with additional operations in Moses Lake, Washington; Kansas City, Missouri; and Fort Worth, Texas. This national MRO network provides seamless support for military, commercial and regional aircraft operators – including airframe maintenance, component repair, engineering support, fuselage painting, and business jet services.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

145721691214325

Featured job

Aircraft Mechanic L2

Southeast (Miami, FL)
Posted on 2/2/2026

Aircraft Mechanic II is responsible for performing routine and non-routine maintenance on commercial aircraft.

Essential Duties and Responsibilities

Perform preventive maintenance, repairs, part replacement and modifications for aircraft Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data. Troubleshoot problems, make repairs, and prepare areas for complete inspections. Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead. Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work. Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data. Ensure that the issued Task Card is properly scanned together with the Technician’s information before beginning the assigned task(s). Adhere to standard procedures and policies. Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number. Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times. Report any tool issues to stores and ensure the correct tag is attached and properly completed. Take part in any required training including GMM and safety. Proven ability to work alone and in a team environment. Able to perform intermediate/heavy maintenance tasks with little supervision. Perform flight control and engine throttle rigging. Able to use FAA approved data (i.e. IPC, M/M, OHM, SRM) proficiently.

Requirements

Minimum 3 years aircraft technician experience. 737/ MD80 Experience Required. A320 experience, preferred. Must Have Own Tools Must be able to read, write and speak the English language.

Miscellaneous

Candidates must report on the first day with 2 forms of acceptable identification (same used for new hire paperwork) to identify employment eligibility. Written and practical test will be given on day one.

About Our Client

Our Client provides turn-key aircraft maintenance, repair and overhaul (MRO) services for a wide array of commercial and military aircraft. As an independent FAA EASA approved repair station, our client’s services include scheduled and non-scheduled passenger airlines, cargo operators and leasing company’s maintenance.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

212556817861934

Featured job

Avionics Technician L2

Southeast (Miami, FL)
Posted on 2/2/2026

As an Avionics Technician, you will be responsible for electrical maintenance and repair on Commercial Aircraft types.

Essential Duties and Responsibilities

Inspect, test, troubleshoot and repair the complex electronic components of communication, navigation, and flight-control systems (for engine operations, flight patterns, navigation systems, radio communications, and weather radar systems). Must know how to interpret flight test data to diagnose malfunctions. Carryout preventive maintenance, repairs, part replacement and modifications for aircrafts included on Commercial Jet’s ops specs. Must be proficient with wire stripping, connector repair and re-pinning and wire/harness layup. Perform functional flight tests of electrical and electronic systems. Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data. Must complete and sign maintenance and installation documents for every piece of equipment. Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead. Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work. Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data. Ensure that the issued Task Card is properly scanned together with the Technician’s information before beginning the assigned task(s) for time-keeping purposes. Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number. Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times. Report any tool issues to stores and ensure the correct tag is attached and properly completed. Take part in any required training including GMM and safety. Keep all work areas clean and orderly.

Requirements

3+ years of avionics experience on commercial aircraft Required to be able to read schematics/blueprints of moderate complexity, engineering drawings and technical instructions. High School Diploma/GED. Must be able to read, write and speak English.

Miscellaneous

About Our Client

Our Client provides turn-key aircraft maintenance, repair and overhaul (MRO) services for a wide array of commercial and military aircraft. As an independent FAA EASA approved repair station, our client’s services include scheduled and non-scheduled passenger airlines, cargo operators and leasing company’s maintenance.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

219839780693483

Featured job

A&P Mechanic 9

Southeast (Opa-locka, FL)
Posted on 2/2/2026

Join the team as an A&P Mechanic in Opa-Locka, FL, where you’ll contribute to world-class aircraft maintenance. In this role, you’ll play an essential part in inspecting, troubleshooting, and repairing corporate aircraft, ensuring they meet top safety and quality standards. If you are a motivated professional with a passion for aviation and technical precision, this is a prime opportunity to grow your skills and career with one of the most respected names in the industry.

Essential Duties and Responsibilities

Perform Scheduled and Unscheduled Maintenance: Conduct inspections, tests, and repairs on aircraft to ensure optimal functionality and safety. Troubleshoot and Diagnose Mechanical Issues: Efficiently locate and correct any mechanical problems in accordance with company and FAA standards. Documentation and Compliance: Accurately document all maintenance actions and ensure compliance with Bombardier and FAA regulations. Collaborate with Team Members: Work closely with other mechanics, inspectors, and engineers to troubleshoot and resolve technical issues. Utilize Technical Manuals and Schematics: Rely on detailed manuals and schematics to execute precise repairs and modifications.

Requirements

Airframe & Powerplant (A&P) license Minimum of 8 years’ experience either on: fixed wing aircraft Business Jet/Corporate aircraft experience is required Ability to interpret and work with mechanical engineering drawings Basic PC skills, and have the ability to effectively communicate in English both written and verbal form on individual and / or aircraft status Basic set of hand tools with the ability to demonstrate inventory & control of tools Must obtain appropriate Ground Support Equipment Qualifications as required Ability to work unscheduled overtime including nonscheduled workdays, holidays, work in seasonal and inclement weather outside Ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)

Miscellaneous

About Our Client

Our client is a global leader in aviation, committed to creating cutting-edge aircraft that set the standard for performance, reliability, and innovation. With headquarters in Montreal, Canada, they operate globally, including in the U.S., where they maintain a significant presence.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

158127186373514

Featured job

Sheetmetal Mechanic

West (Tucson, AZ)
Posted on 2/2/2026

The Sheetmetal Mechanic will troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.

Essential Duties and Responsibilities

Adhere to clients General Work Requirements Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner. Remove / install aircraft components as required Fabricate and or modify structural modifications on aircraft parts Perform minor structural repairs on composite components either attached or detached Assist in conducting hidden damage inspection of aircraft structures Assist with complex structural repairs either on or off aircraft Operate ground support equipment as required Assist with aircraft component repair Perform mechanical / electrical removals and installations as required May assist with maintenance at off-site locations Assist in wing removal as required Assist maintenance as required Inspect confined areas of airframe Assist in designing, modifying and welding metal fixtures as required Assist in providing time estimates as required Fabricate sheet and/or composite components

Requirements

Minimum of 3 years' of structural sheet metal repair and modification experience, or sustained similar experience Corporate jet aircraft or commercial aircraft experience preferred. CRJ airframe experience a plus. MRO experience a plus. Military aircraft maintenance experience (Depot/Isochronal/Phase inspections) a plus. FAA Airframe and Powerplant (A&P) or Airframe (A) License is required. Must possess their own tools. Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing. Must be comfortable with 12-hour shift work, which includes days / nights and weekends.

Miscellaneous

About Our Client

For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors. Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

191783367346034

Featured job

A&P Mechanic L3

Southeast (Miami, FL)
Posted on 2/2/2026

A&P Mechanic III is responsible for performing routine and non-routine maintenance on commercial aircraft.

Essential Duties and Responsibilities

Perform preventive maintenance, repairs, part replacement and modifications for aircraft Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data. Troubleshoot problems, make repairs, and prepare areas for complete inspections. Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead. Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work. Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data. Ensure that the issued Task Card is properly scanned together with the Technician’s information before beginning the assigned task(s). Adhere to standard procedures and policies. Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number. Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times. Report any tool issues to stores and ensure the correct tag is attached and properly completed. Take part in any required training including GMM and safety. Proven ability to work alone and in a team environment. Able to perform intermediate/heavy maintenance tasks with little supervision. Perform flight control and engine throttle rigging. Able to use FAA approved data (i.e. IPC, M/M, OHM, SRM) proficiently.

Requirements

Minimum 5 years aircraft technician experience. 737/ MD80 Experience Required. A320 experience, preferred. Active A&P License Must Have Own Tools Must be able to read, write and speak the English language.

Miscellaneous

Candidates must report on the first day with 2 forms of acceptable identification (same used for new hire paperwork) to identify employment eligibility. Written and practical test will be given on day one.

About Our Client

Our Client provides turn-key aircraft maintenance, repair and overhaul (MRO) services for a wide array of commercial and military aircraft. As an independent FAA EASA approved repair station, our client’s services include scheduled and non-scheduled passenger airlines, cargo operators and leasing company’s maintenance.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

187296012095873

Temp Fabricator Assembler

South Central (Tulsa, OK)
Posted on 2/2/2026

Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metallic and nonmetallic parts and assemblies for aerospace industry applications.

Essential Duties and Responsibilities

Performs routine developmental learning assignments and applies standard solutions to work situations of a routine or repetitive nature. May perform a variety of routine duties related to the area to which assigned. Uses hand and power tools such as routers, drill motors, die grinders and other like tools to complete the required operations called out in the work instructions. Trims parts to fit and files, grinds, deburrs, bevels edges, polishes surfaces and other wise finishes out the material, part or assembly to specifications. Assembles detail parts into subassemblies and complete assemblies using written and verbal work instructions. Installs rivets, bolts, screws and clips and prepares and applies adhesives. Inspects assemblies and installation for conformance to specifications. Operates production machines and equipment such as hot or cold presses, band saws, and other like production machines to fabricate parts, components and material for production uses. Reviews production and process documentation and production scheduling and planning and assist in expediting the flow of material, parts and assemblies.

Requirements

High School Diploma or GED Must be able to use small hand tools and machinery Previous manufacturing experience preferred.

Miscellaneous

About Our Client

This client is headquartered in Tulsa, Oklahoma and has an International footprint. As a manufacturer, supplier, and MRO, our client has diversified to become a major aerospace player in multiple arenas. This client desires candidates that are seeking long term commitments with the opportunity to become direct employees of the organization.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

149141947342573

Featured job

Avionics Technician

South Central (Fort Worth, TX)
Posted on 2/2/2026

Our client, is seeking a knowledgeable and experienced Avionics Technician to support aircraft maintenance operations with a strong focus on avionics installation, troubleshooting, testing, and repair. APA Services is facilitating the hiring process including candidate screening and interview coordination, with the intent of placing technicians who are seeking a long-term, direct employment opportunity. In this role, the Avionics Technician will be responsible for installing, testing, repairing, and documenting complex avionics and electrical systems, including navigation, communication, flight monitoring, and passenger-related systems. This position begins with a short evaluation or audition period to confirm technical capability, attention to detail, and overall fit. Successful candidates will transition to direct employment with our client following this period. A formal interview, either in person or via live video, is required.

Essential Duties and Responsibilities

We are looking for a knowledgeable, experienced avionics technician to join our team. The responsibilities of the avionics technician include running wires/cables, mounting antennas, connecting instruments for navigation and engine monitoring, installing radios, autopilots, passenger entertainment systems and configurations. A technician that possesses great attention to detail and a strong working knowledge of advanced electronics and systems diagnostics. Ultimately, a top-notch avionics technician that has great manual dexterity, and experience with quality control analysis. Installing and testing complex avionics equipment and electrical systems on aircraft. Ensuring that all avionics equipment works properly before return to service and that they do not interfere with any other electronic device. Removing, repairing, and re-installing any problematic avionics equipment before an aircraft is returned to service. Performing intricate and highly reliable soldering on components. Assembling and installing electrical components. Providing accurate diagnoses of discrepancies noted. Organizing ground support and test equipment. Analyzing flight test data to diagnose malfunctions and study the operations of the electrical components. Coordinating all work with Avionics manager, technicians, and aircraft maintenance crew. Keeping detailed records of all repairs and work performed on the aircraft in accordance with the repair station guidelines.

Requirements

At least 3 years of work experience with aircraft electrical systems installation and repair, with specific aircraft maintenance and troubleshooting knowledge. At least 2 years of work experience on designated helicopters (Airbus – AS350, EC130, EC135, EC145; Agusta – 109, 119, 139; Bell – 206, 407, 429, 412, 505; MD – 500; Sikorsky – S76). Certifications in electrical or aviation maintenance courses preferred. Experience with systems such as NAV/COM, Autopilot, GPS, and RVSM. An understanding of other aircraft systems, such as hydraulics and flight controls. The ability to read and interpret schematics and blueprints. Excellent analytical, attention-to-detail, troubleshooting, communication, and teamwork skills. Steady hands and excellent eyesight.

Miscellaneous

This position is intended to transition to direct employment following a short evaluation period. Candidates must be willing to complete an in-person or live video interview. Competitive compensation based on experience. Benefits upon direct hire include paid time off, paid holidays, medical benefit options, and 401(k) participation.

About Our Client

Our client, is a leading helicopter maintenance, repair, and modification organization headquartered in Fort Worth, Texas. They operate FAA Part 145–approved repair stations and provides comprehensive MRO, avionics installation, and aircraft modification services for a wide range of rotorcraft platforms, including Airbus, Bell, Leonardo, MD, and Sikorsky aircraft. Serving commercial, government, and military operators, our client is known for technical capability, regulatory compliance, and full-lifecycle aircraft support.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

946216762319476

Featured job

Avionics Technician L3

Southeast (Miami, FL)
Posted on 2/2/2026

As an Avionics Technician, you will be responsible for electrical maintenance and repair on Commercial Aircraft types.

Essential Duties and Responsibilities

Inspect, test, troubleshoot and repair the complex electronic components of communication, navigation, and flight-control systems (for engine operations, flight patterns, navigation systems, radio communications, and weather radar systems). Must know how to interpret flight test data to diagnose malfunctions. Carryout preventive maintenance, repairs, part replacement and modifications for aircrafts included on Commercial Jet’s ops specs. Must be proficient with wire stripping, connector repair and re-pinning and wire/harness layup. Perform functional flight tests of electrical and electronic systems. Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data. Must complete and sign maintenance and installation documents for every piece of equipment. Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead. Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work. Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data. Ensure that the issued Task Card is properly scanned together with the Technician’s information before beginning the assigned task(s) for time-keeping purposes. Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number. Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times. Report any tool issues to stores and ensure the correct tag is attached and properly completed. Take part in any required training including GMM and safety. Keep all work areas clean and orderly.

Requirements

5+ years of avionics experience on commercial aircraft Required to be able to read schematics/blueprints of moderate complexity, engineering drawings and technical instructions. High School Diploma/GED. Must be able to read, write and speak English.

Miscellaneous

About Our Client

Our Client provides turn-key aircraft maintenance, repair and overhaul (MRO) services for a wide array of commercial and military aircraft. As an independent FAA EASA approved repair station, our client’s services include scheduled and non-scheduled passenger airlines, cargo operators and leasing company’s maintenance.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

211535183417222

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs