Jobs Available

101 - 110 of 207 Matches
Featured job

Sheetmetal Mechanic (licensed)

Southeast (Tampa, FL)
Posted on 8/20/2026

This Sheetmetal Mechanic is responsible for fabricating, repairing, replacing, or rebuilding aircraft structures, repair parts, and special tools, in accordance with policies, procedures, requirements, and specifications established by the company, applicable government agencies, and aircraft manufactures as contained in approved Maintenance Manuals.

Essential Duties and Responsibilities

Must have working knowledge and the ability to fabricate, repair, replace, or rebuild aircraft structures, repair parts, and special tools. Heavy phase maintenance experience on other military aircraft types may be considered. Works according to written and/or verbal instructions. Performs all work assigned in accordance with approved maintenance procedures. Records work performed and assumes responsibility for that work as indicated by his/her signature. Uses blueprints, schematics, technical drawings, and Maintenance Manuals in performance of assigned duties. Performs touch up painting as needed (within task area). May do experimental and developmental work as assigned.

Requirements

Two (2) years’ experience in heavy aircraft maintenance, preferably with an airline and/or MRO aircraft company. Must have thorough working knowledge of all forms and documents required to support heavy maintenance service, including, but not limited to Company policy and procedure manuals, FAR’s, AD’s, Service Bulletins, and Maintenance Manuals. Able to read and interpret technical manuals, instructions, blueprints, and drawings. Efficient in the use and application of tools, gauges, instruments, etc. necessary for the accomplishment of duties assigned. Must have an understanding and working knowledge of hazardous material handling and disposal as related to the job assignment. Valid and current Airframe and Powerplant license REQUIRED. Must have minimum required tools. Meet the qualifications to obtain a SIDA badge. High School diploma or equivalent.

Miscellaneous

MUST be able to pass a 10 year federal background check in order to obtain an airport security badgeEach candidate tracking in will receive either an Airbus Training or Boeing Training (Gen Fam); at no cost to the employee

About Our Client

On the MRO side of the business, our client provides best-in-class services ranging from light repairs to full heavy maintenance visits. On the cargo conversion side, our client provides the very best technical solutions at sensible economics to ensure that freighter operators have sustainable market advantages.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

556267450215362

Featured job

CNC Operator III

West (Carson City, NV)
Posted on 8/20/2026

We’re looking for experienced CNC Operators to support the precision manufacturing and repair of critical turbine engine components. You’ll set up and operate CNC and conventional machines to produce close-tolerance parts that meet exact specifications and strict aerospace quality standards. This is hands-on, detail-driven work where precision matters. You’ll run equipment, inspect your own work, make necessary adjustments, and ensure every part is produced correctly and according to established processes. If you take pride in accurate machining, quality workmanship, and getting parts right the first time, you’ll fit in well here.

Essential Duties and Responsibilities

Program, set up, and operate CNC and conventional machines Load programs and make simple edits when needed Set up machines, fixtures, tooling, and materials Run parts to production specifications Inspect and measure parts using handheld measuring tools Blend surfaces or remove excess material using hand tools or machines Modify parts as required to meet specifications Follow assembly and production requirements for new manufactured parts Use computerized tracking systems as needed Maintain 5S standards in your work area Follow all health, safety, and environmental rules Work within ISO / Total Customer Satisfaction (TCS) quality requirements Follow the Corporate Code of Ethical Standards Support company core values Keep a clean, safe, and organized workspace Work effectively on your own or with the team

Requirements

High school diploma or equivalent Minimum 5 years CNC experience preferred Passing score on job-related skills test Able to read and write in English Able to follow verbal and written instructions Comfortable using handheld measuring tools Basic math skills for measurements and tolerances Reliable, safety-minded, and detail-oriented Team player with a good attitude

Miscellaneous

About Our Client

Our client is a global leader in the aerospace and turbine engine industry, specializing in advanced manufacturing, precision component repair, and innovative solutions that extend the life and performance of critical engine components. With decades of industry experience and a strong reputation for engineering excellence, quality, and innovation, they support some of the world’s most demanding commercial aviation, defense, and energy applications.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

212066236871382

Featured job

Sheetmetal Mechanic

Northeast (Bridgeport, WV)
Posted on 8/20/2026

The Sheetmetal Mechanic will troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.

Essential Duties and Responsibilities

Adhere to clients General Work Requirements Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner. Remove / install aircraft components as required Fabricate and or modify structural modifications on aircraft parts Perform minor structural repairs on composite components either attached or detached Assist in conducting hidden damage inspection of aircraft structures Assist with complex structural repairs either on or off aircraft Operate ground support equipment as required Assist with aircraft component repair Perform mechanical / electrical removals and installations as required May assist with maintenance at off-site locations Assist in wing removal as required Assist maintenance as required Inspect confined areas of airframe Assist in designing, modifying and welding metal fixtures as required Assist in providing time estimates as required Fabricate sheet and/or composite components

Requirements

Minimum 3+ years of structural sheet metal repair and modification experience or sustained similar experience. corporate jet aircraft or commercial aircraft experience preferred CRJ airframe experience a plus MRO experience a plus FAA A&P OR A license is required Must have own tools Ability to communication in English aircraft maintenance actions both verbally and in writing Must be comfortable with 12hr shift work, which includes days/nights and weekends.

Miscellaneous

About Our Client

For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors. Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

313991515398826

Featured job

Aircraft Mechanic II (unlicensed)

West (Goodyear, AZ)
Posted on 8/20/2026

We are seeking experienced Unlicensed Aircraft Mechanics to support a leading commercial aircraft MRO operation. This role focuses on heavy maintenance, line maintenance, return-to-service activities, aircraft storage, and engine removals and installations. Candidates do not need an A&P certificate but must have recent, hands-on commercial aircraft maintenance experience and be able to perform maintenance tasks in accordance with FAA regulations, customer requirements, and company procedures.

Essential Duties and Responsibilities

Perform aircraft maintenance, repairs, and modifications on commercial aircraft in accordance with FAA regulations and approved maintenance data. Remove and install engines, aircraft systems, flight controls, and major components. Complete return-to-service (RTS) work, aircraft storage maintenance, preservation, and reactivation tasks. Perform troubleshooting, inspections, component replacements, adjustments, rigging, torquing, and safety wiring. Read and interpret aircraft maintenance manuals, illustrated parts catalogs (IPC), engineering drawings, wiring diagrams, service bulletins, ATA references, and other technical documentation. Complete assigned work efficiently while meeting quality and production expectations. Accurately complete maintenance documentation and ensure all paperwork complies with FAA and customer requirements. Properly identify, tag, and document repairable, serviceable, and condemned parts. Safely operate ground support equipment, including lifts and maintenance stands, after receiving company certification. Maintain a clean and organized work area while following all company safety procedures. Work effectively with supervisors, inspectors, planners, and fellow maintenance team members. Support operations on any assigned shift, including overtime when required.

Requirements

4-6 years of related experience Recent hands-on experience performing maintenance on commercial aircraft. Experience with engine removals/installations, heavy maintenance, line maintenance, return-to-service work, aircraft storage, or similar MRO environments preferred. A&P certification is not required, but is considered a plus. Ability to read and interpret aircraft maintenance manuals, blueprints, engineering drawings, and technical instructions. Working knowledge of FAA maintenance practices and aircraft maintenance procedures. Must provide own basic hand tools. High School Diploma or GED required. Must be able to read, write, and communicate effectively in English.

Miscellaneous

Ability to lift up to 50 pounds. Ability to stand, walk, bend, kneel, crouch, climb ladders and maintenance stands, and work in confined spaces for extended periods. Ability to work in a noisy aircraft maintenance environment and around various weather conditions as required.

About Our Client

Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

214026709058719

Featured job

Welder II

West (Carson City, NV)
Posted on 8/20/2026

We’re looking for an experienced Welder with strong TIG welding skills to support the repair and manufacturing of critical turbine engine components. You’ll perform precision welding, including welding in an inert chamber, where consistency, accuracy, and attention to detail are essential. This is hands-on, detail-driven work where weld quality and following established procedures matter. If you take pride in clean welds, repeatable results, and doing precision work in a structured aerospace environment, you’ll fit in well here.

Essential Duties and Responsibilities

Perform TIG welding, including welding in an inert chamber Weld parts to manufacturing specifications with consistent quality Read and understand blueprints and work instructions Prep parts using grit blasting and other surface prep methods Follow safe machine practices at all times Use standard shop and welding materials correctly Inspect your own work using handheld measuring tools Maintain safety and housekeeping standards in your area Follow the Quality Control Manual (QCM) Work within ISO / Total Customer Satisfaction (TCS) quality requirements Comply with Company RSM and all health, safety, and environmental policies Support continuous improvement and lean initiatives Work with integrity and follow the Corporate Code of Ethical Standards Maintain regular and reliable attendance Help out with other shop tasks as needed

Requirements

Ability to become certified to AWS-D17.1 Must pass applicable vision testing, if required High school diploma or GED Previous welding experience in a manufacturing environment Able to read and write in English Able to follow written and verbal instructions Comfortable using basic measuring tools Able to work independently or as part of a team Willing and able to pass job-related testing

Miscellaneous

About Our Client

Our client is a global leader in the aerospace and turbine engine industry, specializing in advanced manufacturing, precision component repair, and innovative solutions that extend the life and performance of critical engine components. With decades of industry experience and a strong reputation for engineering excellence, quality, and innovation, they support some of the world’s most demanding commercial aviation, defense, and energy applications.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

374697928359152

Featured job

AOG Mechanic Sr.

Southeast (Naples, FL)
Posted on 8/20/2026

APA Services is seeking to hire Senior AOG Mechanics for a long term opportunity in Naples, FL

Essential Duties and Responsibilities

Will work 7 on and 7 off Must be able to pass client's insurance carrier to be allowed to drive the AOG trucks. no DUI, reckless driving charges, or excessive points Under minimal supervision perform a variety of air frame and powerplant service, modification and completion functions. Working on corporate aircraft doing Depot level maintenance, so must have a knowledge of the aircraft from nose to tail. Conduct operational checks on all aircraft systems such as landing gear, engine components, electrical components, control systems including APU operations. Will be performing scheduled/non scheduled maintenance and phase inspections. Candidate should have good solid corporate aircraft experience and an A&P License is required.

Requirements

5+ years’ AOG experience on at least THREE of the following aircraft...Bombardier Challenger 300/350/600, Bombardier Global 5000/5500/6000, Citation Latitude/Sovereign/XLS, Phenom 300, King Air 200/300/350, Legacy 4500/500, Praetor Tools and Truck will be provided Solid work history required (This is a long term assignment. Applicant’s with short stents of employment over the previous 2 years will not be considered) High School Diploma or GED

Miscellaneous

no tools MUST HAVE CLEAN DRIVING RECORD

About Our Client

Since 1950, our partner has set the standard for excellence in business aircraft sales, service and management. Its rich history began in Greenville, SC and has expanded to additional locations in Nashville, TN & Dayton, OH.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

119205396485994

Featured job

Sheetmetal Mechanic II

Southeast (Jacksonville, FL)
Posted on 8/20/2026

Perform a basic to advanced level skilled work to accomplish sheet metal repairs and replacements of structural parts. Fabricate replacement covering, panels, or fairings by using the removed parts as samples. Reads and complies with instructions and safety information as necessary for proper and safe completion of assigned work.

Essential Duties and Responsibilities

Cleans corrosion and treats metal surfaces per the manufacturer’s instructions and specifications. Performs basic sheet metal repairs and replacement of structural parts using the following skills: Use measuring instruments such as rulers and grip gauges Utilize hand and powered tools such as hammers, chisels, hand snips, band and circle saws, drill presses, squaring shears and brakes to cut and form Ability to assemble parts by, bolting, screwing, and riveting Determine different types of fasteners used by symbol Remove and install minor components of aircraft structure or systems such as fairings, cargo liners, cargo floors and access panels Ability to repair minor or secondary structure per the manufactures SRM Fabricates replacement covering, panels, or fairings by using the removed parts as samples. Performs repairs of a cosmetic nature in passenger cabin interiors. Performs and demonstrates understanding of sealing procedures of aircraft structures. Performs bonded repairs of honeycomb structures as instructed. Identifies the locations of pressurized areas of aircraft. Opens and closes areas on the aircraft that are required to be open for inspection. Applies corrosion preventatives and maintains knowledge of areas of the aircraft in which corrosion inhibiting liquids may not be applied. Possesses working knowledge of ATA Codes (Chapter and Subchapters) as well as aircraft zones, narrow body airframe familiarization, and industry standards. Reads maintenance manuals to identify and locate aircraft components on the aircraft, and accurately implements instructions of maintenance manuals. Identifies the structural composition of aircraft (i.e., aluminum or composite) prior to performing any work on the structure. Performs repairs on noted discrepancies, and effectively researches manufacturer’s manuals for appropriate repair procedures prior to performing repairs. Prepares and maintains simple records such as work order documentation, logs, and time and material records, as instructed. Follows safety procedures and wears/uses appropriate safety equipment for the work being performed. Reads instructions and safety information as necessary for proper and safe completion of assigned work. Performs other duties as assigned.

Requirements

Minimum 3 years of sheet metal experience on Airbus and Boeing Aircraft High School Diploma or GED required. Airframe & Powerplant License, preferred Have own tools Must be able to read, write, and speak effectively in English regarding safety sensitive work activities, per FAA requirements. Individual will perform daily transactions within the ERP system (AMROS KIOSK), vending (POU), as well as research customer’s maintenance manuals. Work safely and follow safety rules and regulations. Take action to prevent others from engaging in unsafe practices.

Miscellaneous

Must report with two forms of employment eligibility identification

About Our Client

Our client is an independent provider of aviation services to commercial and government customers in more than 100 countries. Our client's aftermarket expertise and award-winning solutions help customers increase efficiency and reduce costs while maintaining high levels of quality, service and safety.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

185672480596296

Featured job

VIP Interior Installer

South Central (Ardmore, OK)
Posted on 8/20/2026

The VIP Interior Installer will be responsible for removal and install with seats, overhead bins, gallyes, lavs. + Sewing experience and Experience is cab shop preferred

Essential Duties and Responsibilities

Safely perform removal, installation, and/or fabrication of aircraft interiors (which may include seats, carpets, galleys, closets, lavatories, side ledges, bulkheads, doors and panels) Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications Install cabin and cockpit seats and furniture Fabricate and pre- fit interior components associated with the modification specs and does simple layout on such items as O2 boxes, brackets, clips, lights and gaspers etc. Seek methods to cross train to develop technical skills and business knowledge. Remove and install all interior components and soundproofing materials to meet company quality standards Read and interpret blueprints, drawings, and production procedures to determine measurements and installation procedures. Measure and mark installation areas in aircraft interior, using measuring and marking instruments and templates Fit and install items in aircraft, using hand tools, power tools, and fasteners, such as screws, rivets, bolts, and speed nuts Fabricate and install supporting structural devices, such as clips, brackets, angles, gussets, and doublers, using shop equipment Test functional performance of installed items

Requirements

Minimum 5 years or more experience on BBJs and Corporate Aircraft. Remove and reinstall VIP interiors to include disconnecting and reconnecting of avionics and systems. Install carpet and non-textile flooring. Strip and recover headliners, valance panels, deco’s etc. with different materials. Install potted inserts, use of various adhesives, fillers, and aircraft hardware. Sewing, make patterns, layout. Seats, adjust, repair, and recover. Cabinet shop Experience, work with veneers and laminates. Removal, installation, and maintenance of sound reduction kits.

Miscellaneous

Must have minimum required tools. Tool box must be etched shadowed prior to start High school diploma or equivalent

About Our Client

For over 20 years, our client has been providing outstanding aviation services on a global basis to operators of large corporate and VIP aircraft.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

193501563727323

Featured job

Aircraft Mechanic (A)

Northeast (Bridgeport, WV)
Posted on 8/20/2026

The Aircraft Mechanic troubleshoots, repairs, inspects and performs maintenance on customer aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

Essential Duties and Responsibilities

Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures Participate in 5-S activities Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations May assist with maintenance at off-site locations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned

Requirements

Min of 3 years work exp as an Aircraft Technician OR Min 2 years work exp as an Aircraft Technician PLUS CRJ or Challenger airframe experience. MRO experience is a plus Airframe (A) License required. Must possess their own tools. Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing. Must be comfortable with 12-hour shift work, which includes days / nights and weekends.

Miscellaneous

About Our Client

For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors. Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

827214276082386

Featured job

Aircraft Mechanic III (unlicensed)

West (Goodyear, AZ)
Posted on 8/20/2026

We are seeking experienced Unlicensed Aircraft Mechanics to support a leading commercial aircraft MRO operation. This role focuses on heavy maintenance, line maintenance, return-to-service activities, aircraft storage, and engine removals and installations. Candidates do not need an A&P certificate but must have recent, hands-on commercial aircraft maintenance experience and be able to perform maintenance tasks in accordance with FAA regulations, customer requirements, and company procedures.

Essential Duties and Responsibilities

Perform aircraft maintenance, repairs, and modifications on commercial aircraft in accordance with FAA regulations and approved maintenance data. Remove and install engines, aircraft systems, flight controls, and major components. Complete return-to-service (RTS) work, aircraft storage maintenance, preservation, and reactivation tasks. Perform troubleshooting, inspections, component replacements, adjustments, rigging, torquing, and safety wiring. Read and interpret aircraft maintenance manuals, illustrated parts catalogs (IPC), engineering drawings, wiring diagrams, service bulletins, ATA references, and other technical documentation. Complete assigned work efficiently while meeting quality and production expectations. Accurately complete maintenance documentation and ensure all paperwork complies with FAA and customer requirements. Properly identify, tag, and document repairable, serviceable, and condemned parts. Safely operate ground support equipment, including lifts and maintenance stands, after receiving company certification. Maintain a clean and organized work area while following all company safety procedures. Work effectively with supervisors, inspectors, planners, and fellow maintenance team members. Support operations on any assigned shift, including overtime when required.

Requirements

7-9 years of related experience Recent hands-on experience performing maintenance on commercial aircraft. Experience with engine removals/installations, heavy maintenance, line maintenance, return-to-service work, aircraft storage, or similar MRO environments preferred. A&P certification is not required, but is considered a plus. Ability to read and interpret aircraft maintenance manuals, blueprints, engineering drawings, and technical instructions. Working knowledge of FAA maintenance practices and aircraft maintenance procedures. Must provide own basic hand tools. High School Diploma or GED required. Must be able to read, write, and communicate effectively in English.

Miscellaneous

Ability to lift up to 50 pounds. Ability to stand, walk, bend, kneel, crouch, climb ladders and maintenance stands, and work in confined spaces for extended periods. Ability to work in a noisy aircraft maintenance environment and around various weather conditions as required.

About Our Client

Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

168698321104106

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs