Jobs Available

11 - 20 of 140 Matches
Featured job

Sheetmetal Mechanic sr

West (Goodyear, AZ)
Posted on 10/7/2025

Perform quality aircraft maintenance and/or repairs within budgeted time in compliance with all applicable Code of Federal Regulations, Repair Station Procedures, customer requirements, and manufacturer's recommendations. Organize work plan in an efficient and resourceful manner.

Essential Duties and Responsibilities

Perform such typical maintenance operations such as the removal and replacement of aircraft and powerplant components that require bolting, torquing, adjusting rigging and safety wiring, including powerplant and flight control removal and reinstallation. Repair, modify, replace or overhaul aircraft and aircraft systems to ensure airworthiness . Complete all tasks to the quality standards of Company, FAA and our customers' approved maintenance manual. Perform work within estimated or budgeted hours Read and use Maintenance Manuals, Illustrated parts Catalog, Blueprints, ATA Codes, Service Bulletins, routine and non-routines and other related maintenance documents in order to troubleshoot and effectively complete work assignments. Ensures that Company and customer aircraft maintenance documents are accurate and properly annotated. Ensures documents are returned to the Technical Library and/or destroyed, as required, after jobs are complete. Use and operate safely all ground support equipment, (i.e., Main Lifts, Scissor Lifts, etc.) and possess Company operating certification. Promote a culture of safety my monitoring self and others to assure all duties are performed within the guidelines as specified by the Company Team Member Safety Manual. Responsible for the proper execution of parts tags attached to repairable, serviceable or condemned parts. Interface effectively with members of management, other departments and co-workers Keep own and adjacent work area clean Able to work any or all shifts

Requirements

10 years of sheet metal experience on commercial aircraft Able to read schematics/blueprints of moderate complexity, engineering drawings and technical instructions. Have working knowledge of SRM (Repair Station Manual) references. Must have own tools. High School Diploma/GED. Must be able to read, write and speak English. Must be able to lift fifty (50) lbs. Subject to continual loud noises. Must be able to bend, stoop, kneel, and stand for prolonged periods of time, climb steps, ladders and/or service stands. Successfully complete a comprehensive background check, verification of credentials, and a urinary pre-employment test for drugs as per DOT regulations.

Miscellaneous

About Our Client

Our Client provides aftermarket commercial aircraft, engines, and its parts to passenger and cargo airlines, leasing companies, original equipment manufacturers, and government and defense contractors, as well as maintenance, repair, and overhaul (MRO) service providers worldwide. They were founded in 2008 and are headquartered in Florida.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

657288932691082

Featured job

Airframe Structures Mechanic

South Central (Little Rock, AR)
Posted on 10/7/2025

Perform sheet metal operations, install interior shell panels and complete interior operations to prepare aircraft for cabinet installation.

Essential Duties and Responsibilities

Work from 3D blueprints, sketches, diagrams, CATIA models, or verbal instructions. Performs calculations for angles, circumference, diameter, and bend allowances, using shop math to fabricate and/or install complete or major assemblies and sub-assemblies. Modifies completed assemblies and sub-assemblies. Performs check of fabricated items and/or checkout of systems installed. Utilizes aircraft tooling to perform precision sheet metal operations and installations. Install interior shell panels and completes various interior operations. Sets up and operates standard shop equipment Recommends and suggests improved production methods. Works in a safe manner in accordance with OSHA and Company Safety procedures. Cleans work area and aircraft to eliminate and control FOD (Foreign Object Debris). Makes proper entries in Production and Planning Logs and documents all work in computerized system. Completes assigned jobs in prescribed time. Conceives, manufactures and adapts installation tools, to improve repetitiveness and work hours. Protects aircraft components.

Requirements

High school diploma or equivalent Must have at least two (2) years of aircraft manufacturing experience with courses in sheet metal services from a technical school / military or five (5) years of aircraft manufacturing / production experience to substitute for the sheet metal course requirement. Able to work from drawings, sketches, pictures, or verbal specifications. Must be able to use calibrated tools, measuring devices, and set up and operate standard shop equipment. Able to enter or exit aircraft work stands in a safe manner. Able to work from adjustable height stands in a safe manner and be able to climb steps to approximately 25 feet in height, with or without reasonable accommodation. Able to use motorized portable personnel lifts that extend up to 25 feet in height. Must be able to lift and carry 50 pounds with or without reasonable accommodation. Preferred - Experience applying adhesive materials. Preferred - Experience with material shaping and forming. Preferred - Experience using air tools and equipment.

Miscellaneous

WORKING CONDITIONS: Work location for this position is mainly in a climate-controlled hangar with occasional outside work.

About Our Client

Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

204562247231132

Featured job

A&P Mechanic I

Midwest (Great Falls, MT)
Posted on 10/7/2025

As an A&P Mechanic I, you will be responsible for performing routine and non-routine maintenance on commercial aircraft.

Essential Duties and Responsibilities

Perform preventive maintenance, repairs, part replacement and modifications for aircraft Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data. Troubleshoot problems, make repairs, and prepare areas for complete inspections. Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead. Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work. Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data. Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times. Report any tool issues to stores and ensure the correct tag is attached and properly completed. Take part in any required training including GMM and safety. Proven ability to work alone and in a team environment.

Requirements

1-3 years aircraft maintenance experience A&P License Have own tools Adhere to standard procedures and policies. Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number. Able to perform intermediate/heavy maintenance tasks with little supervision. Perform flight control and engine throttle rigging.

Miscellaneous

Tools are required

About Our Client

Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

204451395458750

Featured job

Aircraft Inspector

Midwest (Great Falls, MT)
Posted on 10/7/2025

An Aircraft Inspector will conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data.

Essential Duties and Responsibilities

Record the results of all inspections performed on the proper inspection forms used by the repair station in accordance with this Inspection Procedures Manual. Be thoroughly familiar with the applicable Federal Aviation Regulations, specifications, tolerances, limits, inspection methods, techniques, and equipment used in their area of responsibility to determine the quality of the work performed and the airworthiness of the article. Maintain proficiency with various types of inspection aides used for the inspection of a particular item. Conduct all required inspections in accordance with the applicable Federal Aviation Regulations, manufacturer’s approved data, any customer’s approved program data, and the policies and procedures contained in this Inspection Procedures Manual. Ensure current specifications involving inspection tolerances, limits, and procedures recommended by the manufacturer of the product undergoing inspection and other forms of applicable inspection information are available for reference. Other examples of inspection information would be FAA Airworthiness Directives, manufacturer’s bulletins, approved customer data, and Federal Aviation Regulations. Make final airworthiness determination prior to “Return of Service” on items they are authorized to inspect for any article maintained or altered by this repair station. Reject any work or parts that have not been properly maintained or altered in accordance with Federal Aviation Regulations, manufacturer’s approved data, customer approved data and the policies and procedures contained within this manual. Support the company Safety Program

Requirements

5+ years of aircraft inspection experience Must have active A&P License (2 years minimum) Experience on CRJ 700/900 and Dash 8, is a plus Must have own tools

Miscellaneous

Must report with two forms of employment eligibility identification

About Our Client

Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

994499284381250

Featured job

A&P Mechanic Sr.

Midwest (Salina, KS)
Posted on 10/7/2025

A&P Mechanics perform complex aircraft inspections, repairs, and modifications with minimal supervision. They must ensure that all work accomplished meets quality standards and specifications while interpreting aircraft technical manuals and electrical drawings. Mechanics must be able to follow standard operating procedures and operating support equipment such as external power carts, hydraulic mules, lift platforms, and tow tugs).

Essential Duties and Responsibilities

Perform scheduled, unscheduled or special inspections and maintenance in accordance with Manufacturer’s Maintenance Manuals and Federal Aviation regulations Troubleshoot aircraft systems and perform operational and functional checks; service oil, tires, fuel and hydraulic systems; provide nitrogen and oxygen servicing; inspect and repair pitot static systems and provide battery servicing Troubleshoot and perform maintenance/repairs/component removal/installation on aircraft, engines and a variety of electrical, mechanical and hydraulic components and accessories such as propellers, starters, generators, fuel pumps, hydraulic pumps, actuators, wheels, tires and brakes. Perform structural repairs to airframes, including sheet metal work, riveting, patching and fiberglass/composite work Certify all work as required by FAA regulations, industry guidelines and company standards/procedures, including interfaces as necessary with various computer tracking systems and using appropriate company forms Make required entries for work orders, discrepancies, and corrective actions, and complete all associated computer/paperwork requirements, including turnover logs Assist and train other technicians when needed Participate in ongoing training opportunities, as appropriate for position Perform other duties as assigned

Requirements

5+ years of aircraft maintenance experience Current FAA Airframe and Powerplant license High School Diploma or General Education Degree required. Excellent interpersonal oral and written communication skills. Must be able to read, write and speak English. Highly proficient with computer based technical data programs, and be competent in researching and use of appropriate technical manuals and industry reference materials Must be mechanically adept and demonstrate the skills and knowledge consistent with industry standards for this position, including an understanding of various airframe and power plant systems. Must be able to work inside and outside under varying work and climatic conditions, have the ability to lift up to 70 pounds and must be comfortable with heights. Must have own tools Experience desired on CRJ and ERJ aircraft, Sheet metal experience is a plus Must have strong drive for top notch customer service and safety, and be a team player with a “Can Do” attitude. This is a safety-sensitive position and falls under the provisions of the FAA's mandatory drug and alcohol testing requirements, including the release of prior drug and alcohol testing results from previous employers for the past two (2) years Must pass a pre-employment drug screening and full background investigation which may include education, criminal and work history verifications. If hired, will be subject to mandatory random drug testing.

Miscellaneous

Must Bring Tools

About Our Client

Our client is a complete, one stop FAR part 145 repair station housed in a 32,000 square foot hangar facility located on Sioux City, Iowa's Sioux Gateway Airport (KSUX). They have all the necessary capabilities required to take care of any and all of their clients airline's needs. They provide a complete range of in-house maintenance and repair options from heavy checks, line maintenance, sheet metal repair and fabrication, all the way to complete exterior aircraft paint. They currently have numerous aircraft and engines on our certificate, including General Electric, Pratt an Whitney, and Rolls Royce. Aircraft include Saab, Beech, Embraer, De Haviland, and Bombardier CRJ 900 and Q 400 aircraft. In addition, we have staff mechanics, equipment, and personnel ready at a moments notice to dispatch 24/7 to any location necessary to get your AOG aircraft back in service.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

596766431317389

Featured job

A&P Mechanic II

Midwest (Peru, IN)
Posted on 10/7/2025

A&P Mechanics needed in Peru, IN

Essential Duties and Responsibilities

maintains the airframe and engines of aircrafts to meet FAA standards. This job involves tasks such as performing routine checks and repairs, keeping records of inventory, and identifying faults with components of the plane.

Requirements

Current A&P License 4-5 years of recent experience A&P mechanics should have strong mechanical abilities and knowledge, be incredibly detail-oriented and thorough, and be skilled at working with complex information and equipment.

Miscellaneous

About Our Client

Our client is an aircraft painting company committed to providing its customers unsurpassed quality and dependable return-to-service times at competitive prices. Our client has several domestic facilities and is equipped to process commercial, regional, military, or VIP Corporate aircraft.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

583414176888449

Featured job

A&P Mechanic

West (Tucson, AZ)
Posted on 10/7/2025

The A&P Mechanic troubleshoots, repairs, inspects and performs maintenance on commercial aircraft. Performs and documents all work performed per appropriate manuals and regulations as required.

Essential Duties and Responsibilities

Adhere to clients General Work Requirements Comply with Environmental / Health / Safety policies and procedures Participate in 5-S activities Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations May assist with maintenance at off-site locations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned

Requirements

Minimum of 3 years’ work experience as an Aircraft Technician. MRO/Heavy Maintenance experience OR CRJ airframe experience is REQUIRED. Military aircraft maintenance experience (Depot/Isochronal/Phase inspections) is a plus. FAA Airframe & Powerplant (A&P) license required. Must possess their own tools. Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing. Must be comfortable with 12-hour shift work, which includes days / nights and weekends.

Miscellaneous

About Our Client

For over 130 years our client innovative and integrated solutions have demonstrated our commitment to creating a positive social impact around the globe. Our range of products and services are tailored to meet our customers’ evolving needs across the commercial aviation, energy, transportation and infrastructure, machinery, defense and space systems sectors. Our culture embraces diversity and cooperation, and we promote a healthy balance of professional and personal development, ensuring that your ideas and expertise are valued and respected.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

352015060999187

Featured job

QC Inspector A

South Central (Little Rock, AR)
Posted on 10/7/2025

Perform in-process and final inspections of aircraft systems and components to determine the conformity of the aircraft to approved data and airworthiness. Perform installation inspections of components, structures wiring and other aircraft associated items for conformity to engineering and other approved data.

Essential Duties and Responsibilities

“CRITICAL” Perform complete major inspection of aircraft, components, major assemblies, sub- assemblies, production tools or parts during manufacturing, modifications, installation, service, overhaul or flight to determine airworthiness, safety or conformance to approved data and Company standards and requirements. “CRITICAL” Apply technical knowledge in the fields of mechanics, hydraulics, electricity, sheet metal, rigging, instruments, test flights, etc. to determine and sign off safety, airworthiness, or conformance. “CRITICAL” Perform conformity inspection of components, major assemblies, sub-assemblies, or parts during manufacturing, modifications, installations to determine safety or conformance to standards and requirements. “CRITICAL” Interpret and check prints, both hard copy and electronic, engineering change orders and governmental regulatory procedures and specifications. “CRITICAL” Determine extent of work to be performed where no specifications, regulations or written standards are available. “CRITICAL” Use precision measuring guides, gauges and laboratory instruments. Is familiar with FAR Part 145, 135, 91, 65 and 21 and related A/C’s Is familiar with FWW processes. Prepare necessary aircraft related FAA, customer or company documents. Complete and maintain reports and records as required. Accurately enter electronic data related to aircraft production, completion and installation operations. Suggest dispositions of damaged or worn parts and the possibility of salvage based on FAA/EASA regulations, company practices or procedures. Work in a safe manner in accordance with OSHA and company safety procedures. Perform all other duties as assigned as assigned

Requirements

High school diploma or equivalent. A&P License Minimum of 5 years experience in maintenance of aircraft Experience with FAR 145 Repair Station and FAR 43 Maintenance. Able to read and understand structural and avionic drawings, schematics, test procedures, etc. Good verbal and written communication skills to prepare detailed reports. Computer literacy Critical thinking, logic and analytical skills. Pro-active and team orientated. Able to walk up and down steps with or without reasonable accommodation Able to walk long distances, climb, stand, and kneel for extended periods of time with or without reasonable accommodation Pass vision testing, minimum 20/20 corrected, and with no limitations in color perception. Write and speak clearly and intelligently in English Able to access confined areas. Working knowledge of Federal Aviation Regulations’, Type Certificate Data Sheet, Airworthiness Directives’, Advisory Circulars, etc. Able to work in a high noise environment (jet engines, air tools, etc.) with or without reasonable accommodation

Miscellaneous

Associate degree in aerospace field FCC license ISO 9000 familiarization and/or training. Powerplant License. WORKING CONDITIONS: Some travel may be required. Work various shifts. Outside work and work in non-climate controlled areas are required. Involves exposure to chemicals and dust levels set by OSHA standards.

About Our Client

Our partner is a French aerospace company with proven dual expertise as a manufacturer of both military aircraft and business jets. They are a pioneer in the use of CATIA™, the 3D CAD / CAM system that has become a global standard. They are a creator of more than 100 prototypes in the last century, with over 10,000 aircraft delivered to 90 countries.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

385704134552393

Featured job

A&P Mechanic II

Midwest (Great Falls, MT)
Posted on 10/7/2025

As an A&P Mechanic II, you will be responsible for performing routine and non-routine maintenance on commercial aircraft.

Essential Duties and Responsibilities

Perform preventive maintenance, repairs, part replacement and modifications for aircraft Perform the assigned maintenance task in accordance with the Federal Aviation Regulations, manufacturer’s recommendations, customers approved maintenance program, approved or acceptable data. Troubleshoot problems, make repairs, and prepare areas for complete inspections. Perform high quality and airworthy work in accordance with the Task Card instructions provided to them by the Project Manager and/or their Lead. Become familiar with and follow the requirements of this Repair Station Manual, Federal Aviation Regulations, Airworthiness Directives, advisory circular, manufacturer’s service bulletins and any other required to perform their assigned work. Never begin any maintenance unless in possession of the proper, current and applicable approved or acceptable data. Report any difficulties, uncertainties, unserviceable equipment or potential safety hazards to their supervisor and observe all safety precautions in the performance of assigned tasks at all times. Report any tool issues to stores and ensure the correct tag is attached and properly completed. Take part in any required training including GMM and safety. Proven ability to work alone and in a team environment.

Requirements

3-5 years aircraft maintenance experience A&P License Have own tools Adhere to standard procedures and policies. Accurately and legibly, record the maintenance or alteration on the proper repair station and/or customer supplied forms including their signature or initials and employee number. Able to perform intermediate/heavy maintenance tasks with little supervision. Perform flight control and engine throttle rigging.

Miscellaneous

Tools are required

About Our Client

Our client hosts maintenance facilities in Calgary, Canada, Great Falls, MT and Jacksonville, FL providing complete maintenance, interiors refurbishment and storage capabilities for regional airlines, manufacturers and aircraft leasing companies.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

185538007940988

Featured job

A&P Mechanic III

Midwest (Peru, IN)
Posted on 10/7/2025

A&P Mechanics needed in Peru, IN

Essential Duties and Responsibilities

maintains the airframe and engines of aircrafts to meet FAA standards. This job involves tasks such as performing routine checks and repairs, keeping records of inventory, and identifying faults with components of the plane.

Requirements

Current A&P License 6+ years of recent experience A&P mechanics should have strong mechanical abilities and knowledge, be incredibly detail-oriented and thorough, and be skilled at working with complex information and equipment.

Miscellaneous

About Our Client

Our client is an aircraft painting company committed to providing its customers unsurpassed quality and dependable return-to-service times at competitive prices. Our client has several domestic facilities and is equipped to process commercial, regional, military, or VIP Corporate aircraft.

Constant Cash

Constant Cash is a referral program that allows individuals to make extra money simply by referring qualified candidates. https://apaconstantcash.com

We know it takes great people to do great work, so if you’re interested in joining the APA Services family give us a call at (817) 529-4000

Thanks for taking the time to apply and we look forward to working with you soon.

Job ID

185973460143619

Benefits of working with APA Services

Weekly Payroll, Medical Insurance Available, Cash Advances, Travel Pay and/or bonuses on Select Contracts.
We know it takes great people to do great work, so if you're interested in joining the APA Services family, give us a call at:

(817)529-4000

Thanks for taking the time to visit APA Services and we look forward to working with you soon.

Browse All Jobs